7400 in a non HP rack

Post Reply
User avatar
Richard Siemers
Site Admin
Posts: 1333
Joined: Tue Aug 18, 2009 10:35 pm
Location: Dallas, Texas

Re: 7400 in a non HP rack

Post by Richard Siemers »

Hey Bryan, Nice rack.
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Top
User avatar
BryanW
Posts: 71
Joined: Sat May 03, 2014 2:01 pm
Location: Dallas, TX

Re: 7400 in a non HP rack

Post by BryanW »

Richard Siemers wrote:Hey Bryan, Nice rack.


LOL
Bryan W
Senior Architect/Manager of System Infrastructure, Dallas TX
https://www.linkedin.com/in/bryanlwhite
Top
woodunn
Posts: 37
Joined: Tue Dec 20, 2011 5:45 pm
Location: Adelaide, South Australia

Re: 7400 in a non HP rack

Post by woodunn »

I think we cracked it. 7400 in a 600mm x 1200mm rack with no interference of cables when servicing a power supply. All that was required was one of my team to create a bracket that allowed the PDUs to be mounted 90 degrees from the normal.
Attachments
Power supply removed unimpeaded
Power supply removed unimpeaded
7400_PS.jpg (141.57 KiB) Viewed 13792 times
APC rack with PDUs turned to the rear
APC rack with PDUs turned to the rear
7400_rear.jpg (164.38 KiB) Viewed 13792 times
Nice shiney 7400 to add to our T, V and F series
Nice shiney 7400 to add to our T, V and F series
7400_Front.jpg (156.7 KiB) Viewed 13792 times
Top
User avatar
Richard Siemers
Site Admin
Posts: 1333
Joined: Tue Aug 18, 2009 10:35 pm
Location: Dallas, Texas

Re: 7400 in a non HP rack

Post by Richard Siemers »

Nice. Any info on the bracket modification, or alternate part #'s used?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Top
woodunn
Posts: 37
Joined: Tue Dec 20, 2011 5:45 pm
Location: Adelaide, South Australia

Re: 7400 in a non HP rack

Post by woodunn »

He modified the spare bracket which is supplied with the APC power rail. I will get some pictures of the original and the modified tomorrow.
Top
woodunn
Posts: 37
Joined: Tue Dec 20, 2011 5:45 pm
Location: Adelaide, South Australia

Re: 7400 in a non HP rack

Post by woodunn »

This modification has enabled us to install a 7400 in a 600mm wide rack with no interference from power cords when replacing PDUs
Attachments
Modified bracket bolted to side mounting rail in 600mm wide rack
Modified bracket bolted to side mounting rail in 600mm wide rack
WP_000794.jpg (76.33 KiB) Viewed 13726 times
PDU mounted for rear facing
PDU mounted for rear facing
WP_000799.jpg (121.41 KiB) Viewed 13726 times
Original bracket left. modified bracket right
Original bracket left. modified bracket right
WP_000802.jpg (45.19 KiB) Viewed 13730 times
Top
woodunn
Posts: 37
Joined: Tue Dec 20, 2011 5:45 pm
Location: Adelaide, South Australia

Re: 7400 in a non HP rack

Post by woodunn »

And now to compare racks Bryan......Check ours out! :shock:
Attachments
Cabling complete
Cabling complete
WP_000805.jpg (175.13 KiB) Viewed 13691 times
Top
Post Reply

Return to “3PAR Discussion”