HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 3PAR 8450 dismissPD
PostPosted: Mon Feb 01, 2021 7:24 am 

Joined: Tue Jan 26, 2021 9:48 am
Posts: 16
Good afternoon, Dear forum users.

I ask you to help in solving one issue, we have 3PAR 8450, one day we removed the discs from the basket, but the procedure was not carried out safely, they just pulled it out. After a situation arose that these disks are displayed in the failed status. We tried to transfer chunklets with the command "movepdtospare -f -vacate -nowait", but the error "src_set_invalid" occurs. We tried to disconnect the disk "dismisspd", but the system informs that the disk is in use "Pd id is in use". I ask you to help, how is it possible to delete these disks?


Attachments:
3PAR_error_2.JPG
3PAR_error_2.JPG [ 214.32 KiB | Viewed 15297 times ]
3PAR_error_1.JPG
3PAR_error_1.JPG [ 75.51 KiB | Viewed 15297 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Mon Feb 01, 2021 7:52 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
those chucklets are usually spare (based on number and size). Could be that PD11 was pulled first and started to rebuild on spares from PD10 .. which again was pulled, while the reference to PD10 still exists on those chunklets.

Look at showpd -c to see if anything is used. If so, check with showpdch -mov to see what needs to be moved and move them manually with movech.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Mon Feb 01, 2021 8:17 am 

Joined: Tue Jan 26, 2021 9:48 am
Posts: 16
Thank you for your prompt reply. Two disks were ejected at the same time, tried showpdch -mov but 3PAR does not display these PDs. Tried to manually migrate chunklets, but I get the error "Error: chunklet couldn`t be relocated. Ld raid set failed". If I understand correctly these chunklets belong to .srdata sections. What is the correct way to delete information about disks that no longer exist?


Attachments:
3PAR_error_4.JPG
3PAR_error_4.JPG [ 245.19 KiB | Viewed 15295 times ]
3PAR_error_3.JPG
3PAR_error_3.JPG [ 161.61 KiB | Viewed 15295 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Mon Feb 01, 2021 12:57 pm 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
What does checkhealth -svc detail say?

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 1:02 am 

Joined: Tue Jan 26, 2021 9:48 am
Posts: 16
MammaGutt wrote:
What does checkhealth -svc detail say?


The screenshot shows the output of the command


Attachments:
3PAR_error_5.JPG
3PAR_error_5.JPG [ 182.16 KiB | Viewed 15267 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 6:32 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
Okay. So it doesn't seem like any LDs are failed.

What would this command give as output:

movech -perm -ovrd 10:3564

And what does this give as output:

servicemag status

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 7:01 am 

Joined: Tue Jan 26, 2021 9:48 am
Posts: 16
MammaGutt wrote:
Okay. So it doesn't seem like any LDs are failed.

What would this command give as output:

movech -perm -ovrd 10:3564

And what does this give as output:

servicemag status


With LDs everything is fine, if I understand correctly chunklets were reserved in the system, and the problem lies precisely in displaying PDs with a failed state. The output of the commands is shown in the screenshot. There is no data on 3PAR, is it possible to re-initialize?


Attachments:
3PAR_error_6.JPG
3PAR_error_6.JPG [ 102.93 KiB | Viewed 15246 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 7:12 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
I would cancel the servicemag on PD10. I'm assuming you have no intention of re-adding a drive to that slot.

What does this command provide:

movech -perm -ovrd 11:3561

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 7:41 am 

Joined: Tue Jan 26, 2021 9:48 am
Posts: 16
MammaGutt wrote:
I would cancel the servicemag on PD10. I'm assuming you have no intention of re-adding a drive to that slot.

What does this command provide:

movech -perm -ovrd 11:3561


Servicemag canceled all operations, when trying to transfer chunklets from 11 PDs, the same error occurs as with 10 PDs
Error: chunklet 11: 3561 couldn't be relocated. ld raid set failed


Attachments:
3PAR_error_6_1.JPG
3PAR_error_6_1.JPG [ 53.75 KiB | Viewed 15245 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: 3PAR 8450 dismissPD
PostPosted: Tue Feb 02, 2021 8:17 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
what about:
showld -s

and
showvv -state

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next


Who is online

Users browsing this forum: Google [Bot] and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt