Richard Siemers wrote:
Step 0 : Zone host to storage ports. This is a complex discussion all by itself which you can find in previous posts.
Step 1 : Create host in IMC, add wwns (or iSCSI details if you roll that way)
Step 2 : Create Virtual Volume(s) from a CPG. (Make sure you understand thin provisioning)
Step 3 : Export a Virtual Volume to a Host. Pick a LUN# or let it auto assign one.
Step 4 : check the host, ensure multipath is round robin or ALUA and the lun is visible on all paths.
I have done the zoning portion on the fabric switch, which I understand it very will. Is the 3PAR config. SAN storage concepts are the same, just the configuration is different for Compellent, Hitach, HP 3PAR, etc.
Once again, I want to thank you for these good lectures.