| HPE Storage Users Group https://3parug.com/ |
|
| Hotspare invoked or Not https://3parug.com/viewtopic.php?f=18&t=734 |
Page 1 of 1 |
| Author: | mrhifriend [ Tue May 27, 2014 7:45 am ] |
| Post subject: | Hotspare invoked or Not |
If drives are failed, How to check Hot spare invoked or Not in IMC and CLI |
|
| Author: | Richard Siemers [ Tue May 27, 2014 10:33 am ] |
| Post subject: | Re: Hotspare invoked or Not |
In CLI, showspare will show you all your spares, used and unused. I like "showpd -failed -c" which shows me the list of failed drives and their current chunklet layout. If the drive is evacuating/rebuilding etc.. the "Used" chunklets should be shrinking away as the data is relocated. If you want to see where all the data for a failed drive went, you can use "showpdch -from <PDID>" |
|
| Author: | mrhifriend [ Thu May 29, 2014 2:50 am ] |
| Post subject: | Re: Hotspare invoked or Not |
Thanks Richard |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|