| HPE Storage Users Group https://3parug.com/ |
|
| reinitializing an s800 https://3parug.com/viewtopic.php?f=18&t=639 |
Page 1 of 1 |
| Author: | BookLover99 [ Wed Mar 19, 2014 5:57 pm ] |
| Post subject: | reinitializing an s800 |
We had an S800 with 300+ drives on mothballs for a while. We decided to downsize to only the fastest drives. Once were done we fired it up. We were able to admit all of the physical drives. We can even create volumes and such but we don't have an admin volume which causes us some other pains. How do you initialize the admin volume properly? |
|
| Author: | BookLover99 [ Fri Mar 21, 2014 1:27 pm ] |
| Post subject: | Re: reinitializing an s800 |
What?? Nobody has an answer to this? |
|
| Author: | Brewer [ Fri Mar 21, 2014 4:23 pm ] |
| Post subject: | Re: reinitializing an s800 |
Tried running OOTB again? That should create the admin volumes from scratch. |
|
| Author: | BookLover99 [ Wed Mar 26, 2014 12:21 pm ] |
| Post subject: | Re: reinitializing an s800 |
Actually I figured it out. As the root user on the system you can run "admithw adminvv" and it will take care of it for you. |
|
| Author: | Richard Siemers [ Thu Mar 27, 2014 11:31 pm ] |
| Post subject: | Re: reinitializing an s800 |
Good info... so you had to log into a node as root? What steps did you take to accomplish that? |
|
| Author: | Josh26 [ Sun Mar 30, 2014 5:31 pm ] |
| Post subject: | Re: reinitializing an s800 |
I'm incredibly interested in where you found this. Was it documented, and how did you determine required credentials? Edit: Googling this command literally takes me to this post and contains no other results. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|