HPE Storage Users Group

Hi,

I have a CPG with 8 SSD each 200GB.
Each cage is filled with 2 SSDs.

CPG is 3+1 HA mode.

My problem is, that the overall capacity is about 400GB.

What i see is, that 5 disks are assigned on PORT A as preferred path and only 3 disks are assigned in PORT B.

I am unable to switch the preferred path with servicemag command.

Please help

Alex

_________________
HP MASTER ASE STORAGE

Hello Alex,

Check how much "spare" space they consumed when they installed your SSD. I do protest vehemently the practice of forcing SSD spare space when you have perfectly good FC available for spares, especially in instances where very few SSD drives are installed.

The used 4 spindles worth of SSD for spares on my system, and I continue to protest. This reminds me to open a new case on this subject to protest some more.

_________________
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.

Hi Richard,

the problem was that one disk was on wrong cage port - we had to remove spare chunklets. dismisspd and then admithw...

All is fine now

Thanks
Alex

_________________
HP MASTER ASE STORAGE