HPE Storage Users Group https://3parug.com/ |
|
servicemag test relocate chunklet https://3parug.com/viewtopic.php?f=18&t=451 |
Page 1 of 1 |
Author: | badbird [ Wed Oct 23, 2013 1:05 am ] |
Post subject: | servicemag test relocate chunklet |
Dear All, I try testing servicemag relocate chunklet in normal disk but it cannot resume, how can use servicemag resume chunklet back? Because just testing and the disk without replace, thanks. Time : 2013-10-23 10:53:43 HKT Severity : Informational Type : CLI command executed Message : {3paradm super all {{0 8}} -1 127.0.0.1 32450} {servicemag start -pdid 23} {} Time : 2013-10-23 10:53:43 HKT Severity : Informational Type : 'servicemag start' operation has begun Message : servicemag start -pdid 23 Time : 2013-10-23 10:53:43 HKT Severity : Informational Type : Component state change Message : Magazine 1:11:0, Physical Disk 23 Normal (Servicing) Time : 2013-10-23 13:12:01 HKT Severity : Informational Type : Disk state change Message : pd 23 wwn 5000CCA02255581F changed state from notready to missing because disk gone event was received for this disk. Time : 2013-10-23 13:12:01 HKT Severity : Degraded Type : Component state change Message : Magazine 1:11:0, Physical Disk 23 Degraded (Missing, Servicing) Time : 2013-10-23 13:12:11 HKT Severity : Informational Type : 'servicemag start' operation has completed Message : servicemag start -pdid 23 – Succeeded When I execute servicemag resume 1 11 and the pdid 23 returm from degraded to normal but reume failed. CSDPRISIISAN01 cli% showpd -i Id CagePos State ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType 23 1:11:0 normal 5000CCA02255581F HITACHI HCBRE0900GBAS10K KPWHY0TL 3P00 SAS Magnetic ------------------------------------------------------------------------------------------------ CSDPRISIISAN01 cli% servicemag status -d Cage 1, magazine 11: A servicemag resume command failed on this magazine. The command completed at Wed Oct 23 13:48:05 2013. The output of the servicemag resume was: servicemag resume 1 11 ... mag 1 11 already onlooped ... firmware is current on pd WWN [5000CCA02255581F] Id [23] ... checking for valid disks... Failed -- Disk specified in the servicemag start -pdid option has not been replaced. Please replace the correct disk. servicemag resume 1 11 -- Failed Best regards, Chung |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |