HPE Storage Users Group

hello everyone.
I have 1 3PAR 7200 with a converged HBA Qlogic QLE8242 on each node.
I see that it supports iSCSI and FCoE.

Can I use those ports to directly connect a server using an LC-LC cable? The server has an 8Gb HBA Emulex o Qlogic

Or can I connect with that converged QLE to a 16Gb Brocade SAN Switch?

Do you see it possible?


Node Slot Type -Manufacturer- -Model-- ----Serial---- -Rev- Firmware
0 0 SAS LSI 9205-8e Onboard 01 17.11.00.00
0 1 FC EMULEX LPe12002 Onboard 03 2.10.X.3
0 2 CNA QLOGIC QLE8242 PCGLT0AST8XNEC 58 4.15.8
0 3 Eth Intel e1000e Onboard n/a 3.2.5-k
1 0 SAS LSI 9205-8e Onboard 01 17.11.00.00
1 1 FC EMULEX LPe12002 Onboard 03 2.10.X.3
1 2 CNA QLOGIC QLE8242 PCGLT0AST8XNLP 58 4.15.8
1 3 Eth Intel e1000e Onboard n/a 3.2.5-k


Thanks to all for the help

Sebastian - FROM CHILE

All controller nodes should have 2x 8Gb FC. Those could be direct connected to services with 8Gb HBA.

Qlogic QLE8242 is a 10Gb ethernet (converged network) adapter that supports FCoE and iSCSI. This can only be connected to a 10Gbe Ethernet switch.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.