HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Wed Dec 21, 2022 3:26 am 

Joined: Wed Dec 21, 2022 3:17 am
Posts: 3
Hi All,

Really need help. Was failed SSD disk, which was replaced with new one. I did this many times already, HPE procedure worked well every time.
setpd ldalloc off <DiskID>
showpd -s
movepdtospare -f -vacate -nowait <DiskID>
showpdch -mov
movech -perm -ovrd X:Y
showpdch -spr <DiskID>
removespare PDID:a
dismisspd <DiskID>
Redo Steps 3-7 for all PDs
Remove All PDs from Cage
tunesys -chunkpct 1


But now I get message:
Error: Could not find a relocation target for chunklet Y:X
on some chunks after movech -perm -ovrd X:Y

i% showpd -s 25
Id CagePos Type -State-- -Detailed_State-- -SedState-
25 1:1:0? SSD degraded prolonged_missing unknown
-----------------------------------------------------
1 total

cli% movepdtospare -f -vacate -nowait 25
There are no chunklets to move.

cli% showpdch -mov
blablabla
-----------------------------------------------------------------
Total chunklets: 100
(was 907, were move manually with movech -perm -ovrd X:Y)

cli% servicemag status -d
No servicemag operations logged.

What to do? I dont know.

hope for help.


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Thu Jan 05, 2023 5:29 pm 

Joined: Mon Apr 18, 2022 3:27 am
Posts: 19
Location: NL
I did it with this one :

movepdtospare -devtype -ovrd -perm -nowait <id>


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Sat Jan 07, 2023 4:46 am 

Joined: Wed Dec 21, 2022 3:17 am
Posts: 3
Tried.

cli% movepdtospare -devtype -ovrd -perm -nowait 25
Are you sure you want to move the PD to spare with possible loss of quality?
select q=quit y=yes n=no: y
There are no chunklets to move.

But here:
cli% showpdch -mov
Pdid Chnk LdName LdCh State Usage Media Sp Cl From To
55 405 tp-4-sd-0.135 3 normal ld valid Y N 25:65 ---
55 406 tp-4-sd-0.126 7 normal ld valid Y N 25:135 ---
55 407 tp-4-sd-0.219 7 normal ld valid Y N 25:146 ---
55 409 tp-4-sd-0.137 0 normal ld valid Y N 25:212 ---
55 412 tp-4-sd-0.7 15 normal ld valid Y N 25:264 ---
55 415 tp-4-sd-0.137 8 normal ld valid Y N 25:287 ---
55 417 tp-4-sd-0.441 3 normal ld valid Y N 25:308 ---
55 418 tp-4-sd-0.88 6 normal ld valid Y N 25:316 ---
55 419 tp-4-sd-0.300 15 normal ld valid Y N 25:336 ---
55 420 tp-4-sd-0.181 15 normal ld valid Y N 25:364 ---
55 421 tp-4-sd-0.97 15 normal ld valid Y N 25:399 ---
55 422 tp-4-sd-0.199 3 normal ld valid Y N 25:418 ---
55 424 tp-4-sd-0.129 15 normal ld valid Y N 25:455 ---
55 425 tp-4-sd-1.1 23 normal ld valid Y N 25:471 ---
55 427 tp-4-sd-0.401 0 normal ld valid Y N 25:504 ---
55 428 tp-4-sd-0.235 8 normal ld valid Y N 25:539 ---
55 430 tp-4-sd-0.231 3 normal ld valid Y N 25:590 ---
55 431 tp-4-sd-0.70 24 normal ld valid Y N 25:611 ---
55 432 tp-4-sd-0.167 3 normal ld valid Y N 25:659 ---
55 433 tp-4-sd-0.82 8 normal ld valid Y N 25:709 ---
55 434 tp-4-sd-0.253 8 normal ld valid Y N 25:777 ---
55 435 tp-4-sd-0.359 4 normal ld valid Y N 25:822 ---
55 436 tp-4-sd-0.43 195 normal ld valid Y N 25:846 ---
55 437 tp-4-sd-0.5 210 normal ld valid Y N 25:869 ---
55 438 tp-4-sd-0.5 235 normal ld valid Y N 25:878 ---
55 439 tp-4-sd-0.43 257 normal ld valid Y N 25:886 ---
55 440 tp-4-sd-0.33 7 normal ld valid Y N 25:897 ---
55 441 tp-4-sd-0.151 7 normal ld valid Y N 25:918 ---
55 442 tp-4-sd-0.523 28 normal ld valid Y N 25:930 ---
55 443 tp-4-sd-0.255 13 normal ld valid Y N 25:944 ---
55 444 tp-4-sd-0.188 3 normal ld valid Y N 25:955 ---
55 445 tp-4-sd-0.5 323 normal ld valid Y N 25:962 ---
56 294 tp-4-sd-0.12 39 normal ld valid N N 25:1105 ---
56 379 tp-4-sd-0.7 31 normal ld valid N N 25:272 ---
56 383 tp-4-sd-0.45 3 normal ld valid N N 25:581 ---
56 429 tp-4-sd-0.235 16 normal ld valid Y N 25:541 ---
56 430 tp-4-sd-0.237 23 normal ld valid Y N 25:565 ---
56 431 tp-4-sd-0.78 24 normal ld valid Y N 25:594 ---
56 432 tp-4-sd-0.162 3 normal ld valid Y N 25:612 ---
56 433 tp-4-sd-0.47 1 normal ld valid Y N 25:656 ---
56 434 tp-4-sd-0.251 8 normal ld valid Y N 25:714 ---
56 435 tp-4-sd-0.5 179 normal ld valid Y N 25:807 ---
56 436 tp-4-sd-0.266 4 normal ld valid Y N 25:823 ---
56 437 tp-4-sd-0.5 195 normal ld valid Y N 25:849 ---
56 438 tp-4-sd-0.43 217 normal ld valid Y N 25:870 ---
56 439 tp-4-sd-0.43 243 normal ld valid Y N 25:879 ---
56 440 tp-4-sd-0.149 4 normal ld valid Y N 25:888 ---
56 441 tp-4-sd-0.5 275 normal ld valid Y N 25:903 ---
56 442 tp-4-sd-0.43 297 normal ld valid Y N 25:919 ---
56 443 tp-4-sd-0.5 307 normal ld valid Y N 25:931 ---
56 444 tp-4-sd-0.184 3 normal ld valid Y N 25:947 ---
56 445 tp-4-sd-0.526 4 normal ld valid Y N 25:956 ---
57 381 tp-4-sd-0.188 11 normal ld valid N N 25:965 ---
57 382 tp-4-sd-0.546 7 normal ld valid N N 25:1042 ---
57 383 tp-4-sd-0.220 1 normal ld valid N N 25:1123 ---
57 385 tp-4-sd-0.302 15 normal ld valid N N 25:856 ---
57 387 tp-4-sd-1.1 31 normal ld valid N N 25:586 ---
57 391 tp-4-sd-0.355 18 normal ld valid Y N 25:508 ---
57 392 tp-4-sd-0.5 27 normal ld valid Y N 25:593 ---
57 393 tp-4-sd-0.43 43 normal ld valid Y N 25:599 ---
57 394 tp-4-sd-0.43 57 normal ld valid Y N 25:640 ---
57 395 tp-4-sd-0.43 75 normal ld valid Y N 25:647 ---
57 396 tp-4-sd-0.43 91 normal ld valid Y N 25:655 ---
57 397 tp-4-sd-0.5 99 normal ld valid Y N 25:666 ---
57 398 tp-4-sd-0.139 8 normal ld valid Y N 25:682 ---
57 399 tp-4-sd-0.251 16 normal ld valid Y N 25:718 ---
57 400 tp-4-sd-0.43 131 normal ld valid Y N 25:738 ---
57 401 tp-4-sd-0.43 147 normal ld valid Y N 25:743 ---
57 402 tp-4-sd-0.168 11 normal ld valid Y N 25:759 ---
57 403 tp-4-sd-0.14 8 normal ld valid Y N 25:778 ---
57 404 tp-4-sd-0.43 171 normal ld valid Y N 25:796 ---
57 405 tp-4-sd-0.43 177 normal ld valid Y N 25:803 ---
57 406 tp-4-sd-0.41 7 normal ld valid Y N 25:11 ---
57 407 tp-4-sd-0.322 8 normal ld valid Y N 25:52 ---
57 408 tp-4-sd-0.65 8 normal ld valid Y N 25:73 ---
57 409 tp-4-sd-0.126 15 normal ld valid Y N 25:137 ---
57 410 tp-4-sd-0.105 7 normal ld valid Y N 25:148 ---
57 415 tp-4-sd-0.7 23 normal ld valid Y N 25:268 ---
57 419 tp-4-sd-0.137 16 normal ld valid Y N 25:302 ---
57 420 tp-4-sd-0.161 2 normal ld valid Y N 25:311 ---
57 421 tp-4-sd-0.7 63 normal ld valid Y N 25:318 ---
57 422 tp-4-sd-0.134 16 normal ld valid Y N 25:338 ---
57 423 tp-4-sd-0.65 16 normal ld valid Y N 25:371 ---
57 425 tp-4-sd-0.183 15 normal ld valid Y N 25:416 ---
57 426 tp-4-sd-0.203 15 normal ld valid Y N 25:439 ---
57 427 tp-4-sd-0.223 15 normal ld valid Y N 25:456 ---
57 429 tp-4-sd-0.130 21 normal ld valid Y N 25:489 ---
57 430 tp-4-sd-0.135 11 normal ld valid Y N 25:522 ---
57 431 tp-4-sd-0.243 16 normal ld valid Y N 25:548 ---
57 432 tp-4-sd-1.0 15 normal ld valid Y N 25:569 ---
57 433 tp-4-sd-0.239 16 normal ld valid Y N 25:600 ---
57 434 tp-4-sd-0.234 2 normal ld valid Y N 25:613 ---
57 435 tp-4-sd-0.178 2 normal ld valid Y N 25:660 ---
57 436 tp-4-sd-0.427 24 normal ld valid Y N 25:720 ---
57 437 tp-4-sd-0.145 7 normal ld valid Y N 25:808 ---
57 438 tp-4-sd-0.287 21 normal ld valid Y N 25:824 ---
57 439 tp-4-sd-0.176 11 normal ld valid Y N 25:858 ---
57 442 tp-4-sd-0.5 259 normal ld valid Y N 25:890 ---
57 443 tp-4-sd-0.349 28 normal ld valid Y N 25:905 ---
57 444 tp-4-sd-0.180 11 normal ld valid Y N 25:921 ---
-----------------------------------------------------------------
Total chunklets: 100


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Sat Jan 07, 2023 6:39 am 

Joined: Mon Apr 18, 2022 3:27 am
Posts: 19
Location: NL
I got a message in my diagnostics that ld's were remote or something.

Eventually I got rid of them by doing this :

Analyse
tuneld -dr <ld>

Execute move
tuneld -f <ld>


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Tue Jan 10, 2023 12:08 am 

Joined: Wed Dec 21, 2022 3:17 am
Posts: 3
no success.

is it possible just delete such chunklets, without moving them somewhere?


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Tue Jan 10, 2023 3:41 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1469
Location: Europe
paa1974 wrote:
no success.

is it possible just delete such chunklets, without moving them somewhere?


Sure, you can just delete them. But it will corrupt the LDs (and VVs) they are used in.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: Can not move chunks with movech -perm -ovrd X:Y command
PostPosted: Thu Jan 12, 2023 3:04 am 

Joined: Mon Apr 18, 2022 3:27 am
Posts: 19
Location: NL
paa1974 wrote:
no success.

is it possible just delete such chunklets, without moving them somewhere?


What output dit you get? And what was the command you did?


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt