HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing Node
PostPosted: Mon Oct 03, 2022 3:06 pm 

Joined: Sun Apr 30, 2017 7:41 pm
Posts: 24
Hello.

I can't finish the Node Rescue process.

It is a 3PAR 72000 MU6.

I am installing a new node which is OK. It performs the entire process but fails due to "space" issues. I have made several node changes and this is the first time it has happened to me.

The IDE disk is the same as the other NODE (blue).

I have run all known processes from the WACK>



In short, I follow all the steps and execute:

whack>unset sys_serial

whack>ahci init

Whack>ide erase

whack>reset



Everything runs ok, but never joins the cluster and ends with this error

[ 45.018834] Total CM for this node is 4 GB
[ 45.018838] patrol_delay 4614 msecs
[ 45.018850] Starting eagle_cm_patrol_thread....
[ 45.018853] Num Srcs 14 Src Size 16384
[ 45.060562] Starting scan mir log thread 0x226b
[ 45.060564] Setting recovery log scan delay to 292 ms
init: Loading tpd kernel module: done.
init: Remapping interrupts
init: WARNING: irq name contains comma delimited list [aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv]
init: WARNING: irq name contains comma delimited list [nemoe 0x78, Eos intr]
init: Loading tpd kernel patch modules: Patch99 Patch110 Patch114 P119 Patch135 Patch138 Patch139 Patch142 Patch149 Patch160 Patch165
init: Configuring powerfail device /dev/pfail_storage: 801
init: done.
init: Initializing eanet0: done.
init: Rotating PM logs: done.
init: Rotating PR event logs: done.
init: Starting Process Manager: pm.
init: Rotating pr_sync_ide logs: done.
init: Starting PR Sync IDE: pr_sync_ide.
init: coreman: tpdinit run at epoch=1664819228sec with boot at epoch=1664819176sec
init: coreman: file system usage - /dev/sda7 - used=15227584KB (used-core=172KB) free=46257040KB total=61484624KB
init: coreman: space removal targets - freeMin=0KB freePct=0KB corePct=0KB targetToRemove=0KB targetToRemoveMinLow=0KB
init: coreman: exit - no free space requirements to satisfy
init: Launching tpd_cfg_tornado_dcncage script to work around 'Configures a Tornado Enclosures DP-1 port' issue
init: Running l
3PAR(R) InForm(tm) OS 3.2.2.709 1612423-1 ttyS0
1612XXX-1 login:

I Put the log file here.
I do not have current support from HPE.
I will greatly appreciate the help.



Thanks!!!!
Sebastian.


Attachments:
log completo.txt [22.67 KiB]
Downloaded 556 times
Top
 Profile  
Reply with quote  
 Post subject: Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing
PostPosted: Mon Oct 03, 2022 11:30 pm 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
I see one important line in there…

Quote:
[ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[


From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing
PostPosted: Tue Oct 04, 2022 7:50 am 

Joined: Sun Apr 30, 2017 7:41 pm
Posts: 24
MammaGutt wrote:
I see one important line in there…

Quote:
[ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[


From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around.


Thanks for your answer.
Are the nodes not compatible with each other?
This compatibility is not achieved with the procedure in the Wack> ?

From Whack> on the replacement node issue prom edit <CR>. Then hit return to see each item in the prom.
SMI Whack>prom edit
Board Spin: 03
Size * 256 bytes: 04
Board Class: 920
Board Base: 200040
Board Rev: 91
Assembly Vendor: FXN
Assembly Year: 2012
Assembly Week: 30
Assembly Day: 03
Assembly Serial: 00103530
Alternate Class: ffff
Alternate Base: ffff
Alternate Dash: ff
System Serial: 9902109
Node ID: 03 FF or value of slot node is installed in
Midplane Type: 1b See Below for current settings.
Node Type: 40
SMI Whack>
Midplane and Node Type must match the other nodes. This list will change as new models are released . Current selections as of August 2014 are
StoreServ 7200: Mid-plane Type 1a Node Type 20
StoreServ 7400: Mid-plane Type 1b Node Type 40
StoreServ 7450: Mid-plane Type 1e Node Type 80


Top
 Profile  
Reply with quote  
 Post subject: Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing
PostPosted: Tue Oct 04, 2022 8:54 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
sebastian7780_2 wrote:
MammaGutt wrote:
I see one important line in there…

Quote:
[ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[


From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around.


Thanks for your answer.
Are the nodes not compatible with each other?
This compatibility is not achieved with the procedure in the Wack> ?

From Whack> on the replacement node issue prom edit <CR>. Then hit return to see each item in the prom.
SMI Whack>prom edit
Board Spin: 03
Size * 256 bytes: 04
Board Class: 920
Board Base: 200040
Board Rev: 91
Assembly Vendor: FXN
Assembly Year: 2012
Assembly Week: 30
Assembly Day: 03
Assembly Serial: 00103530
Alternate Class: ffff
Alternate Base: ffff
Alternate Dash: ff
System Serial: 9902109
Node ID: 03 FF or value of slot node is installed in
Midplane Type: 1b See Below for current settings.
Node Type: 40
SMI Whack>
Midplane and Node Type must match the other nodes. This list will change as new models are released . Current selections as of August 2014 are
StoreServ 7200: Mid-plane Type 1a Node Type 20
StoreServ 7400: Mid-plane Type 1b Node Type 40
StoreServ 7450: Mid-plane Type 1e Node Type 80


Nodes need to be indentical. 7200 and 7200c are not (7200c has more CPU cores and I believe also control/data cache)

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing
PostPosted: Wed Oct 05, 2022 8:43 am 

Joined: Sun Apr 30, 2017 7:41 pm
Posts: 24
Mammagutt

You were right,.
The problem has already been resolved.
7200 node was being used in a 3PAR 7200c.
all ok!
Thank you very much.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt