HPE Storage Users Group https://3parug.com/
AddStoreServExec - Exception occurred creating object, Error https://3parug.com/viewtopic.php?f=18&t=3832	Page 1 of 1

---

Author:	ferencmatyas [ Wed Aug 31, 2022 3:41 am ]
Post subject:	AddStoreServExec - Exception occurred creating object, Error
Hello all, Thanks for all the helpful posts, this is my first time. I noticed one 7400 StoreServ was disconnected in the Service Console, saying invalid credentials. The solution is to remove and readd. I tried with 3parcli and 3paradmin, but fails at registering credentials. This worked on a 7200 3PAR at other site, and as I read this is the practice on certificate renewal, so it should work. Service Processor Version: 5.0.8.0-28527 3PAR Version: Current 3.2.2.709 compared to the 7200 3PAR these users are missing: 3paredit 3parservice 3pars 7400 cli% showuser Username Domain Role Default 3paradm all super N 3parbag all super N 3parbrowse all browse N 3parcim all browse N 3parcli all super N 3parscom all browse N 3parsvc all super N 3parsysrep all super N 2022-08-31 09:58:40.035+0200 INFO [SSMC UserOperationExecutor:Attach StoreServ - 1638398] AddStoreServExec - Updating task "Attach StoreServ - 1638398" on GLOBAL-ALL to step 1 and state Running with detail message "Start user operation" 2022-08-31 09:58:40.036+0200 INFO [SSMC UserOperationExecutor:Attach StoreServ - 1638398] StoreServ - 2FF70002AC0095FE - new state = REGISTER_SSMC 2022-08-31 09:58:40.168+0200 INFO [SSMC UserOperationExecutor:Attach StoreServ - 1638398] AddStoreServExec - Updating task "Attach StoreServ - 1638398" on GLOBAL-ALL to step 2 with detail message "Registering credentials" 2022-08-31 09:58:40.292+0200 ERROR [SSMC UserOperationExecutor:Attach StoreServ - 1638398] AddStoreServExec - Exception occurred creating object, Error: null 2022-08-31 09:58:40.292+0200 INFO [SSMC UserOperationExecutor:Attach StoreServ - 1638398] AddStoreServExec - Updating task "Attach StoreServ - 1638398" on GLOBAL-ALL to step 3 with exception Failed: null I only have HW support and cannot open a HPE ticket. Any ideas? Or just redeploy a new Service Processor? Thanks a lot! Best Regards Ferenc Attachments: Rehalp 3PAR Meldung.PNG [ 33.55 KiB | Viewed 5190 times ]

---

Author:	MammaGutt [ Wed Aug 31, 2022 9:42 am ]
Post subject:	Re: AddStoreServExec - Exception occurred creating object, E
Verify the credentials with SSH. Did this work with this SP before? You require P162(?) for SP5 on 3.2.2MU6. If everything looks okay, I would redeploy.

---

Author:	ferencmatyas [ Wed Aug 31, 2022 11:33 am ]
Post subject:	Re: AddStoreServExec - Exception occurred creating object, E
Hello, thanks for your reply. I can log on with SSH. Yes the SP worked, another site had the same error at the same time with invalid credentials, but there I could readd the StoreServ to the SP with no issues. I check the redeploy and let you know. Thanks again! Regards Ferenc

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/