mujzeptu wrote:
This is the standard 600GB 15k disks recommended by HPE. Same part # as what I am replacing.
I did a servicemag start -pdid 6. It ran fine. I replaced the disk and tried servicemag resume 0 2. The 3 good disks i left alone in the magazine. Servicemag resume failed. I put back in the original, failed disk and tried to resume. That servicemag resume failed.
I then tried to dismisspd on 6. It referenced a bunch of chunklets I manually moved off.
I then tried dismisspd again and it worked. I then put back in the new disk and tried to admitpd/admithw. It adds a new disk, with the same ID and the same WWN. I try to do a servicemag resume and it fails with the mentioned errors.
Why are you trying to do servicemag if the disk was successfully added to the array with admitpd/admithw? What does checkhealth say? My guess is that you shrinked and expanded the array with one drive and need to do tunesys to get data back onto the drive.
Is this a 3.5" FC drive or a 2.5" SAS drive using FC<->SAS adapter?