HPE Storage Users Group
https://3parug.com/

3par error from SSH in response to any command
https://3parug.com/viewtopic.php?f=18&t=3620
Page 1 of 1

Author:  Hector [ Sat Jul 10, 2021 1:56 pm ]
Post subject:  3par error from SSH in response to any command

Hello

I have an error appear at the SSH for one of our storage system 3PAR 7400

in response to almost any command says " showsys: Error: Could not find request handler: EAIPC_NOPHANDLE --no phandle is available or found "

Image

I appreciate if you give me any ideas about this problem.
Thanks.

Author:  MammaGutt [ Tue Jul 13, 2021 1:57 am ]
Post subject:  Re: 3par error from SSH in response to any command

Considering you can't get any decent output from "showsysmgr" I would log a case with HPE.

You might need to reboot a node, you might need to reboot the system and you could possibly get into a worse state by doing one of the options above...

What 3PAR OS version are you running?

Author:  Hector [ Tue Jul 13, 2021 6:29 am ]
Post subject:  Re: 3par error from SSH in response to any command

MammaGutt wrote:
Considering you can't get any decent output from "showsysmgr" I would log a case with HPE.

You might need to reboot a node, you might need to reboot the system and you could possibly get into a worse state by doing one of the options above...

What 3PAR OS version are you running?


Many thanks for your help, 3PAR OS version is 3.2.2 MU4

I had tried to reboot a node but CLI reject that command too. my network connectivity is ok and I can SSH to 3PAR but SSMC and SP disconnected and can't established a connection.

Thanks.

Author:  MammaGutt [ Tue Jul 13, 2021 9:28 am ]
Post subject:  Re: 3par error from SSH in response to any command

Hector wrote:
MammaGutt wrote:
Considering you can't get any decent output from "showsysmgr" I would log a case with HPE.

You might need to reboot a node, you might need to reboot the system and you could possibly get into a worse state by doing one of the options above...

What 3PAR OS version are you running?


Many thanks for your help, 3PAR OS version is 3.2.2 MU4

I had tried to reboot a node but CLI reject that command too. my network connectivity is ok and I can SSH to 3PAR but SSMC and SP disconnected and can't established a connection.

Thanks.


Yeah, support case is probably the way to go. MU4 has been inactive for a couple of years so probably not a bad idea to get an OS upgrade done as well to MU6 which will be active for as long as the 7000 series is supported.

Author:  Hector [ Tue Jul 13, 2021 10:34 am ]
Post subject:  Re: 3par error from SSH in response to any command

Currently SP disconnected and can't established a connection for OS upgrade.
Thanks

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/