| HPE Storage Users Group https://3parug.com/ |
|
| [3PAR_8200] - Unable to start after power failure [SOLVED] https://3parug.com/viewtopic.php?f=18&t=3579 |
Page 1 of 1 |
| Author: | Cykani [ Fri May 21, 2021 11:34 am ] |
| Post subject: | [3PAR_8200] - Unable to start after power failure [SOLVED] |
Hello, After a power outtage, our 3PAR 8200 is not starting normally. I have a 2-nodes controller and 1 disk enclosure. When the power came back, both power-on simultaneously causing an error on the 3PAR : Quote: InServ cli% showsysmgr Table of contents (TOC) quorum not reached. Reason for being unable to automatically start: Unable to read base TOC from disks to replay powerfail save against 47 disks were available to be examined for TOCs. I've tried to power off all the system and power on with the good sequence (disk -> nodes), but still the same error. I've run the command Quote: setsymgr -f tocgen without success.Do you have any idea? Thanks CN |
|
| Author: | Cykani [ Tue May 25, 2021 1:03 pm ] |
| Post subject: | Re: [3PAR_8200] - Unable to start after power failure [SOLVE |
Hello, Finally i've opened a case on HPE Support. Problem solved. Thanks CN |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|