HPE Storage Users Group https://3parug.com/ |
|
SSMC Set SP credentials https://3parug.com/viewtopic.php?f=18&t=3497 |
Page 1 of 1 |
Author: | koopa79 [ Wed Nov 18, 2020 5:11 am ] |
Post subject: | SSMC Set SP credentials |
Guys, I've recently upgraded to SSMC 3.7.1.1.6 and I've seen there is a call home column when looking at systems. So I've been connecting them up using the Set SP credentials on the 3par in SSMC, but i have 1 3par that every time i click that button I get a pop up saying Please check if service Processor is reachable and retry So my question is, how does SSMC know what the SP details are, as I've never entered them, is it pulling that info from 3par itself? can i manually tell SSMC what the SP IP is, or check what its trying to connect to? I've logged on the SP and everything seems to be fine. |
Author: | MammaGutt [ Wed Nov 18, 2020 5:13 am ] |
Post subject: | Re: SSMC Set SP credentials |
Not answering your question, but for me every issue was solved by removing and re-adding the 3PAR to the SP (and ensuring the SP is SP5.x |
Author: | koopa79 [ Wed Nov 18, 2020 5:47 am ] |
Post subject: | Re: SSMC Set SP credentials |
MammaGutt I've already tried removing the 3par from the SP and putting it back as you've suggested and it still fails. also I am running SP 5.0.6.0.27574, and the 3par is running 3.2.2 MU6 (3par 7200) Thanks |
Author: | MammaGutt [ Wed Nov 18, 2020 7:12 am ] |
Post subject: | Re: SSMC Set SP credentials |
3.2.2 MU6 with minimum P162 I hope? |
Author: | koopa79 [ Wed Nov 18, 2020 10:24 am ] |
Post subject: | Re: SSMC Set SP credentials |
MammGutt Of course, that 3par is running 3.2.2.709 (MU6)+P99,P107,P119,P131,P135,P137,P139,P149,P160,P162 |
Author: | MammaGutt [ Wed Nov 18, 2020 10:50 am ] |
Post subject: | Re: SSMC Set SP credentials |
koopa79 wrote: MammGutt Of course, that 3par is running 3.2.2.709 (MU6)+P99,P107,P119,P131,P135,P137,P139,P149,P160,P162 Just checking, any firewall between SP and SSMC? Unless an update to SP 5.0.7.1 would solve it I would probably log a case. |
Author: | ailean [ Thu Nov 19, 2020 5:23 am ] |
Post subject: | Re: SSMC Set SP credentials |
I played with this recently but with no luck, any idea what port/protocol SSMC is using to reach the SP, so I can check ACLs/Firewalls? (Couldn't see it listed in the admin, user or release notes for SSMC 3.7). |
Author: | koopa79 [ Thu Nov 19, 2020 11:25 am ] |
Post subject: | Re: SSMC Set SP credentials |
i have got a call logged with HPE about this, so if I find out more I'll update in here. HPE have had me try the usual stuff. remove the 3par from the sp and re add it, but none has worked the annoying bit is that is not working on 1 3par. All my others are working fine, and some on the same 3par and SP version. so i know thats all correct |
Author: | koopa79 [ Fri Nov 20, 2020 3:56 am ] |
Post subject: | Re: SSMC Set SP credentials |
Don't know if it just needed doing in the right order, but i've managed to get it working now, but removing the 3par from SSMC and re adding it. This time when i selected Set Sp credentials, it actually asked me for the password etc and now it all works. |
Author: | cali [ Tue Nov 24, 2020 3:19 pm ] |
Post subject: | Re: SSMC Set SP credentials |
Hi, Look at my Blog here: https://d8tadude.com/2019/12/10/hpe-3pa ... -insights/ Scroll down to: IF YOU DON’T SEE “SET SP CREDENTIALS”? May help. Cali |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |