hi to all
so
q: where is File Persona in ssmc 3.6.1.0.27 ??
or how to enable this block ?
ths
| Attachments: |
|
ssmc2.png [ 29.87 KiB | Viewed 10607 times ] |
|
ssmc1.JPG [ 21.77 KiB | Viewed 10607 times ] |
| HPE Storage Users Group https://3parug.com/ |
|
| ssmc 3.6 file persona https://3parug.com/viewtopic.php?f=18&t=3472 |
Page 1 of 1 |
| Author: | terminus [ Thu Sep 24, 2020 11:20 am ] | |||
| Post subject: | ssmc 3.6 file persona | |||
hi to all so q: where is File Persona in ssmc 3.6.1.0.27 ?? or how to enable this block ? ths
|
||||
| Author: | MammaGutt [ Fri Sep 25, 2020 12:07 am ] |
| Post subject: | Re: ssmc 3.6 file persona |
I'm taking a guess on it not being visible because none of the systems have it enabled. If you log on thru CLI and run "showsys -param" and look for ProfilePersona or something like you should see if it is set to "block-only" or "block-preferred". What type of system do you have and what type of ports are you planning on using for file persona? |
|
| Author: | terminus [ Fri Sep 25, 2020 2:49 am ] |
| Post subject: | Re: ssmc 3.6 file persona |
ths for your answer showsys -param System parameters from configured settings --------Parameter-------- ----Value---- RawSpaceAlertFC : 0 RawSpaceAlertNL : 0 RawSpaceAlertSSD : 0 RemoteSyslog : 0 RemoteSyslogHost : 0.0.0.0 RemoteSyslogSecurityHost : 0.0.0.0 SparingAlgorithm : Minimal EventLogSize : 4M VVRetentionTimeMax : 336 Hours UpgradeNote : PortFailoverEnabled : yes AutoExportAfterReboot : yes AllowR5OnNLDrives : no AllowR0 : yes ThermalShutdown : yes FailoverMatchedSet : yes SessionTimeout : 01:00:00 HostDIF : yes HostDIFTemplate : 3par_host_dif AllowWrtbackSingleNode : 0 AllowWrtbackUpgrade : 0 DisableDedup : no OverprovRatioLimit : 0.0 OverprovRatioWarning : 0.0 DisableChunkletInitUNMAP : no PersonaProfile : block-only ComplianceOfficerApproval : no AllowR5OnFCDrives : yes DisableCompr : no RemoteCopyHostThrottling : no SingleLunHost : no now we have fc adapters only so how to enable file persona at cli ? |
|
| Author: | MammaGutt [ Fri Sep 25, 2020 8:52 am ] |
| Post subject: | Re: ssmc 3.6 file persona |
If you only have FC adapter, how do you intend to access file persona? As far as I know the use of RCIP port has been deprecated. You would need to use setsys command in CLI to change personaprofile and do a rolling node reboot for it to be applied. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|