HPE Storage Users Group https://3parug.com/ |
|
HPE 3PAR Service processor 5.0.7.0-28213 high CPU https://3parug.com/viewtopic.php?f=18&t=3462 |
Page 1 of 2 |
Author: | profp62 [ Wed Aug 12, 2020 4:33 am ] | ||
Post subject: | HPE 3PAR Service processor 5.0.7.0-28213 high CPU | ||
Hi all After upgrading SP to version 5.0.7.0-28213 from 5.0.6, i have problem with CPU. After SP start / restart CPU load increases continuously and after one week is at 100 %. I have two SP on this site and exactly the same behavior. Some ideas ? I didn't find any info ... Thanks Frantisek
|
Author: | MammaGutt [ Wed Aug 12, 2020 10:43 am ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
I would log a support case with HPE. |
Author: | T16 [ Wed Aug 26, 2020 5:38 am ] | ||
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU | ||
I am seeing EXACTLY the same. After a period of time, the cpu just ramps up and up, until it sits continuously high, for hours. I have never waited more than 24hrs to see if it eventually settles down, but yeah, same issue here I am afraid. I Just tend to reboot the SP's, but it comes back again a few days later. Did you log a case? If so, I will too.
|
Author: | T16 [ Wed Aug 26, 2020 11:44 am ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
Oh I forgot... you have your vSP's hooked into vcenter with cross-stack analytics? We do, and each time the vSP gets rebooted, it loses connection and we get a degraded error with the cross stack analytics until I go in manually and re-apply the same existing settings and its fine again. What a ****show this 5.0.7 release is, I wish I had never bothered! |
Author: | T16 [ Mon Aug 31, 2020 10:44 pm ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
lol typical, after rebooting the vSP's a good few times, the problem has gone away for the time being. |
Author: | profp62 [ Wed Sep 16, 2020 3:51 pm ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
Hi all I wasn't here for some time. Yes i did log support case and the answer was, that is common well known bug in 5.0.7 No service note, no info on download portal .... Should be repaired in next version. Please stay on 5.0.6.1. Bye |
Author: | MammaGutt [ Thu Sep 24, 2020 9:26 am ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
https://support.hpe.com/hpesc/public/do ... 02915en_us 5.0.7.1 seems to have a fix for high CPU. |
Author: | sanjac [ Mon Sep 28, 2020 6:47 am ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
I'm having the same problem is 5.0.7.1. available for download?I can't find it |
Author: | cali [ Mon Sep 28, 2020 3:38 pm ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
At the moment, you have to open a case. |
Author: | T16 [ Thu Oct 01, 2020 1:41 pm ] |
Post subject: | Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU |
Available for download now via myenterpriselicense. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |