HPE Storage Users Group https://3parug.com/ |
|
Adding drives to 4 node 8440 https://3parug.com/viewtopic.php?f=18&t=3414 |
Page 1 of 1 |
Author: | bshaffer [ Thu May 28, 2020 5:34 pm ] |
Post subject: | Adding drives to 4 node 8440 |
Hello, We currently have a 4 node 8440 that is half populated with a total of 48 SSDs, 12 in each cage. We have acquired an additional 48 to populate the remaining free slots. My question is, when adding the disks, do I fully populate cage 0, and then fully populate cage 1, then 2 etc.....or do I do a pair of drives in cage 0, followed by a pair in cage 1 etc. The entire array will be using the same drive type and size. Thanks. |
Author: | MammaGutt [ Thu May 28, 2020 11:51 pm ] |
Post subject: | Re: Adding drives to 4 node 8440 |
Doesn't really matter if you add them in one go. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |