Is the controllers up and cluster has formed (can you ping the IP of the system)?
If yes, the proceed. If no, check LEDs on controllers/nodes.
SSH to the system and do checkhealth. If only one cage is missing I would try removing one of the IFCs (where you connect SAS cables) and take one of your spares from the 7200 to see if it helps.
Just as a side note. What 3PAR OS version where you running prior to shutdown, how many cages you got and are you using anything other than the short 1 and 2 meter SAS cables?
_________________ The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.
|