HPE Storage Users Group
https://3parug.com/

system sapacity spare =0
https://3parug.com/viewtopic.php?f=18&t=3369
Page 1 of 1

Author:  buratinoff [ Mon Mar 09, 2020 1:11 pm ]
Post subject:  system sapacity spare =0

Hi, 3parguru team, please, help me, we wipe our test old 7200 system (with out support contract) and it has next output in cli:
# showsys -space
...
Spare : 0
Used : 0
Unused : 0
...
why spare is =0. And how fix it? tunesys?

Author:  MammaGutt [ Mon Mar 09, 2020 1:12 pm ]
Post subject:  Re: system sapacity spare =0

Based on the rest of the output, you don't have any drives

(Used =0, Unused =0)

Author:  buratinoff [ Mon Mar 09, 2020 1:43 pm ]
Post subject:  Re: system sapacity spare =0

Very funny, your answer, do you see ouput showsys -space on any system?


------------- System Capacity (MiB) -------------
Total Capacity : 300236800
Allocated : 206851072
Legacy Volumes : 0
User : 0
Snapshot : 0
CPGs (TPVVs & TDVVs & CPVVs) : 190763008
Shared : 0
Private : 181823003
Base : 181382684
Reserved : 181382684
Reserved (vSphere VVols) : 0
Snap : 440319
Reserved : 440319
Reserved (vSphere VVols) : 0
Free : 8940005
Unmapped : 0
System : 16088064
Internal : 547840
Admin : 1314816
Spare : 0
Used : 0
Unused : 0

Free : 93384704
Initialized : 93384704
Uninitialized : 0
Unavailable : 0
Failed : 1024
------------------ Efficiency -------------------
Compaction : 2.95
Dedup : -
Compression : -
Data Reduction : -
Overprovisioning : 1.69

Author:  MammaGutt [ Tue Mar 10, 2020 12:20 pm ]
Post subject:  Re: system sapacity spare =0

Right.

That looks better.

Do "showsys -param" and verify that SparingAlgorithm isn't set to custom. If is it set to anything else it should be fixed by "admithw".

If you set it to custom you manually need to create the spare chunklets with createspare command.

Author:  buratinoff [ Tue Mar 10, 2020 1:49 pm ]
Post subject:  Re: system sapacity spare =0

spare parametr is set minimal. We can change it to default if need.
Can you explain how much need create spare chunklets?
10-20 on every magazine?
createspare <every magazine>:xx , where xx=?

Author:  MammaGutt [ Wed Mar 11, 2020 12:25 am ]
Post subject:  Re: system sapacity spare =0

Default and minimum is often the same unless you have a very low number of disk of any type.

Since sparing is set to minimum, just run admithw in CLI and it should fix it.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/