| HPE Storage Users Group https://3parug.com/ |
|
| Low Temperature? https://3parug.com/viewtopic.php?f=18&t=3354 |
Page 1 of 1 |
| Author: | 3parnoob [ Tue Feb 04, 2020 7:27 am ] |
| Post subject: | Low Temperature? |
Hi, Has anyone had a similar issue to a cage being degraded in the SSMC, but the showcage seems to be ok? I've seen the Environmental Control faults shows a temperature warning? zone 2 - low temperature warning |
|
| Author: | Proc_rqrd [ Fri Feb 07, 2020 9:35 am ] |
| Post subject: | Re: Low Temperature? |
hi, yes i have had a few arrays go low temp. ssmc or checkhealth will mention it degraded but not give a reason. shownodeenv, or others will show you an inlet or temp range, and eventually you will find the one that is below the low mark for the "within tolerance" range.... been around forever and not really been trapped as an error/condition that shows up easily. i guess too cold is still rare. some of our all ssd arrays, are essentially "too cold" to be in cold aisles. if they dont generate enough of their own heat, we physically reduce cold air on the inlet side to clear the error. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|