HPE Storage Users Group https://3parug.com/ |
|
Change IP Management and SP https://3parug.com/viewtopic.php?f=18&t=3282 |
Page 1 of 1 |
Author: | fernandojosepenna [ Wed Sep 18, 2019 9:22 am ] |
Post subject: | Change IP Management and SP |
Hi Guys i have several hp 3par and i need to change IP management and Service Procesor IP, someone have a procedure to change. Hostname Firmware (OS Version) 7200_01 3.2.1 (MU2) 7200_02 3.2.2 (MU4) 8450_01 3.2.2 (MU4) P10400_01 3.2.2 (MU4) P10400_02 3.2.2 (MU4) P10400_03 3.2.2 (MU4) P10400_04 3.2.2 (MU4) I Need change these Ips because the network dont have a smtp service, to send alerts when crash disk and batteries or others devices, and move to another network to resolve these problems. Wait. |
Author: | MammaGutt [ Wed Sep 18, 2019 3:18 pm ] |
Post subject: | Re: Change IP Management and SP |
"help setnet" in CLI is a good place to start for the 3PAR |
Author: | fernandojosepenna [ Thu Sep 19, 2019 8:49 am ] | ||
Post subject: | Re: Change IP Management and SP | ||
Hi Guys, Does Procedure works? Does someone has already done and it worked?
|
Author: | MammaGutt [ Thu Sep 19, 2019 9:12 am ] |
Post subject: | Re: Change IP Management and SP |
Yes, and if you issue "help setnet" in CLI, you will get the documentation for the command to understand what options you have and how it works in case you do a typo. |
Author: | Yavor [ Fri Sep 20, 2019 9:28 am ] |
Post subject: | Re: Change IP Management and SP |
Hello, i recently had to do similar thing and it works ( in my case i had to change only the mask and the gateway, thats why i had to change it twice - you can't change the mask without changing the IP ) 4. 3PAR disk arrays Select an unused IP address in the same network as the 3PAR StoreServ storage array. Log in to the command line interface of the 3PAR and execute the following commands: setnet startaddr <current IP of the 3PAR> <unnused IP in the same network> <new Subnet Mask> setnet startgateway <new Gateway IP address> setnet finish -f setnet startaddr <the unused IP in the same network> <original IP of the 3PAR> <new Subnet Mask> setnet finish -f 5. 3PAR Service Processor Log in to the command line interface of the 3PAR VSP and select option 1 = Configure Network Change the Subnet Mask and the Gateway |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |