HPE Storage Users Group
https://3parug.com/

HP3par 7200 replace NL failed disk with an FC one
https://3parug.com/viewtopic.php?f=18&t=3274
Page 1 of 1

Author:  coolirc [ Thu Aug 29, 2019 8:53 am ]
Post subject:  HP3par 7200 replace NL failed disk with an FC one

Hello i have a failed disk NL of capacity of 1000 Gb and i have only 300 GB FC disks on stock how can i replace it with FC one when i do the magazine command it says that the replaced disk is not compatible . or how can i dismiss the current failed pd , the dismisspd command is not working it says that there some chunklets left on device for spare .

Code:
HP3PAR_7200 cli% servicemag status -d
Cage 2, magazine 23:
A servicemag resume command failed on this magazine.
The command completed at Tue Jul 23 07:05:04 2019.
The command started at Tue Jul 23 07:04:03 2019
The output of the servicemag resume was:
servicemag resume 2 23
... mag 2 23 already onlooped
... Disk wwn 5000C5007E7A0768 has wrong device type. Please replace it with a drive that has a devtype of NL and speed of 7K RPM.
Failed --
The replacement drive has the wrong device type or speed. Please replace the drive with the correct type.
servicemag resume 2 23 -- Failed



Code:
HP3PAR_7200 cli% dismisspd 38
Error : Pd id 38 has 52 chunklet marked as spare

HP3PAR_7200 cli% removespare 38:a
Are you sure you want to remove spares?
select q=quit y=yes n=no: y
52 spares removed
HP3PAR_7200 cli% dismisspd 38
Error : Pd id 38 is referenced by chunklet 12:849



thanks for help

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/