HPE Storage Users Group
https://3parug.com/

Replace Service Processor
https://3parug.com/viewtopic.php?f=18&t=3199
Page 1 of 1

Author:  Dewlastexile [ Thu May 23, 2019 1:04 am ]
Post subject:  Replace Service Processor

Hello!

We want to replace SP to new version from 4.4.0-GA22 to 4.5.
When we filled in the form (deploy new SP, select option "Replacing a previous SP", write down Previous SP ID), we got error message: "StoreServ Serial Number validation failed - Internal Error"

Author:  MammaGutt [ Thu May 23, 2019 7:40 am ]
Post subject:  Re: Replace Service Processor

SP 4.5 is an intermediate version only to be used during upgrade from 3.2.2 to 3.3.1.

When using the restore option you should always restore to the version you are restoring from.

Prior to SP5, SP version and 3PAR OS versions are linked. 4.4.0-GA22 was only supported for managing 3.2.2 GA/EGA and is the only SP version supported with that 3PAR OS version.

If you have a working SP, why would you want to restore when you can upgrade?

Author:  Dewlastexile [ Fri May 24, 2019 3:19 am ]
Post subject:  Re: Replace Service Processor

We had some problems with upgrade.
Finally, we installed new SP and replace SP ID.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/