HPE Storage Users Group https://3parug.com/ |
|
3PAR simulator installation https://3parug.com/viewtopic.php?f=18&t=3185 |
Page 1 of 1 |
Author: | mrsr2174 [ Thu May 09, 2019 1:20 pm ] | ||||||
Post subject: | 3PAR simulator installation | ||||||
Hi , i am using VMware Workstation 15 Player and loaded 3 vm's. ( ESD & two nodes). I followed everthing , but i can't access 3par from SSMC. I mean i can't add 3par in SSMC. ************************** What i confgiured in 3par node. Ip: 192.168.17.2 Subnet: 255.255.255.0 default Gateway: 192.168.17.1 Is this correct? ************************** My Laptop ipconfig Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 192.168.17.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 192.168.131.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . :
|
Author: | markinnz [ Sun May 12, 2019 11:28 pm ] |
Post subject: | Re: 3PAR simulator installation |
Maybe don't bridge the network interfaces of the 3PAR nodes, instead have them connect back into a private LAN, then configure the SSMC appliance to have one interface bridged to the network (so you can get to it via HTTP) and it's second interface attach to the private LAN the 3PAR nodes are also on. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |