HPE Storage Users Group
https://3parug.com/

3PAR simulator installation
https://3parug.com/viewtopic.php?f=18&t=3185
Page 1 of 1

Author:  mrsr2174 [ Thu May 09, 2019 1:20 pm ]
Post subject:  3PAR simulator installation

Hi ,
i am using VMware Workstation 15 Player and loaded 3 vm's. ( ESD & two nodes).
I followed everthing , but i can't access 3par from SSMC. I mean i can't add 3par in SSMC.

**************************
What i confgiured in 3par node.
Ip: 192.168.17.2
Subnet: 255.255.255.0
default Gateway: 192.168.17.1

Is this correct?

**************************
My Laptop ipconfig
Ethernet adapter VMware Network Adapter VMnet1:

Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.17.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

Ethernet adapter VMware Network Adapter VMnet8:

Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.131.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

Attachments:
node_01_sett.png
node_01_sett.png [ 44.93 KiB | Viewed 9569 times ]
node_00_sett.png
node_00_sett.png [ 43.7 KiB | Viewed 9569 times ]
ESD.png
ESD.png [ 44.15 KiB | Viewed 9569 times ]
sim_vmNets.png
sim_vmNets.png [ 17.28 KiB | Viewed 9570 times ]
sim_vmNets.png
sim_vmNets.png [ 17.28 KiB | Viewed 9570 times ]

Author:  markinnz [ Sun May 12, 2019 11:28 pm ]
Post subject:  Re: 3PAR simulator installation

Maybe don't bridge the network interfaces of the 3PAR nodes, instead have them connect back into a private LAN, then configure the SSMC appliance to have one interface bridged to the network (so you can get to it via HTTP) and it's second interface attach to the private LAN the 3PAR nodes are also on.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/