HPE Storage Users Group https://3parug.com/ |
|
information for Card0 not displayed in cage0 https://3parug.com/viewtopic.php?f=18&t=3100 |
Page 1 of 1 |
Author: | Yavor [ Fri Feb 15, 2019 3:34 am ] |
Post subject: | information for Card0 not displayed in cage0 |
Hello, i have the following issue: Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model FormFactor 0 cage0 --- 0 1:1:1 0 24 12-29 - 4078 DCN2 SFF -----------Cage detail info for cage0 --------- Position: --- Interface Board Info Card0 Card1 Firmware_status - Current Product_Rev - 4078 State(self,partner) -,- OK,OK VendorId,ProductId -,- HP,DCN2 Master_CPU - No SAS_Addr - 5001438030F5953E Link_Speed(DP1,Internal) -,- 12.0Gbps,12.0Gbps Locate - Off However all the disks show Normal status. Any suggestions are welcome. Please spare me "log a case to HPE". Thank you. P.S. shutdownnode reboot 0 fixed the card status |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |