HPE Storage Users Group
https://3parug.com/

SSMC 3.4.1 connecting to InfoSight
https://3parug.com/viewtopic.php?f=18&t=3079
Page 1 of 1

Author:  koopa79 [ Thu Jan 10, 2019 4:44 am ]
Post subject:  SSMC 3.4.1 connecting to InfoSight

Guys,

I can't seem to find a guide anywhere. I want to add our new SSMC 3.4.1 server to infosight, but i don't really like giving servers full internet access.

Any idea if its just port 443 (inbound / outbound) and if so is there a list of IP's i can allow access to so this isn't open for everywhere

Thanks

Author:  cali [ Thu Jan 10, 2019 5:02 am ]
Post subject:  Re: SSMC 3.4.1 connecting to InfoSight

https://infosight.hpe.com
should be enough

Author:  koopa79 [ Thu Jan 10, 2019 6:00 am ]
Post subject:  Re: SSMC 3.4.1 connecting to InfoSight

do you know if that's outbound from the server?

Is inbound required from infosight?

Author:  cali [ Thu Jan 10, 2019 7:53 am ]
Post subject:  Re: SSMC 3.4.1 connecting to InfoSight

SSMC pull the Infromation from InfoSight.
SPOCC push the Information to InfoSight.

But you need both directions, because SSMC need to Login in InfoSight.

Author:  koopa79 [ Thu Jan 10, 2019 10:13 am ]
Post subject:  Re: SSMC 3.4.1 connecting to InfoSight

So i have infosight connected as shown in the screen shot, but that is only with outbound traffic. The problem is none of my 3pars are currently at the level o/s to accept infosight analytics yet (lots of 3.2.2 MU2 & MU3) We should be upgrading them soon, so i thought if this was in place then i'd start getting better reports at a later date once upgraded.

Are yous hould it also needs inbound, if so i'll raise a change internally to give it access internally from insight

Thanks

Attachments:
infosight.JPG
infosight.JPG [ 13.34 KiB | Viewed 14037 times ]

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/