HPE Storage Users Group https://3parug.com/ |
|
add 2 or more storages physical processor https://3parug.com/viewtopic.php?f=18&t=3057 |
Page 1 of 1 |
Author: | terminus [ Thu Dec 13, 2018 3:33 am ] | ||
Post subject: | add 2 or more storages physical processor | ||
hi to all ! I've physical service processor ProLiant DL120 Gen9, version 5.0.3.0-24806 I'm need add 2 storages at this sp when I'm added first storage - all ok but I'm added second storage - error storage is already atached why ? and how to do it correctly ?
|
Author: | ailean [ Thu Dec 13, 2018 4:58 am ] |
Post subject: | Re: add 2 or more storages physical processor |
At the moment I think you can only have a single array connected to a SP. You would need to buy another SP or run a virtual SP for the 2nd array. |
Author: | terminus [ Thu Dec 13, 2018 6:33 am ] |
Post subject: | Re: add 2 or more storages physical processor |
ailean wrote: At the moment I think you can only have a single array connected to a SP. You would need to buy another SP or run a virtual SP for the 2nd array. so, why ? this is not virtual processor, it's physical |
Author: | MammaGutt [ Thu Dec 13, 2018 7:39 am ] |
Post subject: | Re: add 2 or more storages physical processor |
terminus wrote: ailean wrote: At the moment I think you can only have a single array connected to a SP. You would need to buy another SP or run a virtual SP for the 2nd array. so, why ? this is not virtual processor, it's physical The very simple answer is "Because HPE/3PAR says so". It's been this way forever. It has never been supported (or even possible?) to have more than 1 3PAR connected to a SP. |
Author: | ailean [ Thu Dec 13, 2018 9:32 am ] |
Post subject: | Re: add 2 or more storages physical processor |
I remember talking with some original 3PAR engineers back in the day about this and they said it could be done but wasn't something they encouraged for customer installs. Since then they have released the virtual SP as a low cost alternative for smaller setups so I don't think they'll change the one-to-one relationship for now. Maybe if they combine the SP and SSMC roles in future. |
Author: | terminus [ Fri Dec 14, 2018 3:08 am ] | ||
Post subject: | Re: add 2 or more storages physical processor | ||
ailean wrote: I remember talking with some original 3PAR engineers back in the day about this and they said it could be done but wasn't something they encouraged for customer installs. Since then they have released the virtual SP as a low cost alternative for smaller setups so I don't think they'll change the one-to-one relationship for now. Maybe if they combine the SP and SSMC roles in future. so what about this ?
|
Author: | ailean [ Fri Dec 14, 2018 5:51 am ] |
Post subject: | Re: add 2 or more storages physical processor |
Like I said it's always been possible but it's never been supported for general customer use. |
Author: | terminus [ Tue Dec 18, 2018 6:46 am ] |
Post subject: | Re: add 2 or more storages physical processor |
new problem after added two storages at one SP Notification from storage (SP ID: SP000900000E) Realtime Alert Process Notify time: 2018/12/15 21:33:33.907 ( Installed machine: 3PAR STORESERV Event urgency: alert Severity: Major Event count: 3 Event time: 2018/12/15 20:25:01.612 Event description: 3PAR StoreServ Authentication Failure -----------------------Event Message------------------------ 12 authentication failures in 120 secs. ---------------------Corrective Action---------------------- Description: An instance of the CLI client unsuccessfully attempted multiple logins within a short period of time. This may be due to an application trying to access the storage system with incorrect login credentials. Resolution: Ensure that attempts to login are using the correct credentials. --------------------------Abstract-------------------------- (Major)CLI CLI_AUTH_FAIL 12 authentication failures in 120 secs. ----------------------------Text---------------------------- Event ID: 8934 Node 1 Customer Alert - Yes, Service Alert - Yes Severity: Major Event time: Sat Dec 15 20:25:01 2018 Event type: Authentication Failure Alert ID: 422 Msg ID: 150006 Component: CLI Event string: 12 authentication failures in 120 secs. Notification key: 0x0150006 Count: 7, up from 4 reported on Sat Dec 15 13:22:05 2018 any idea ? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |