HPE Storage Users Group
https://3parug.com/

HP 3par 7200 add new node
https://3parug.com/viewtopic.php?f=18&t=3024
Page 2 of 2

Author:  coolirc [ Tue Nov 27, 2018 6:58 am ]
Post subject:  Re: HP 3par 7200 add new node

thanks for your answer

while consulting some sellers they said that the HP3PAR 7000 HP M6710 2.5 in 2U SAS drive enclosure has been replaced by HP H6Z26A ( HP 3PAR 8000 ) is it correct can anyone confirm

but according to the hp site : https://support.hpe.com/hpsc/doc/public ... 841#N10195

they mention Part Number QR490A

for
HP M6710 2.5 in 2U SAS drive enclosure


thanks already

Author:  nicks0955 [ Tue Nov 27, 2018 8:54 am ]
Post subject:  Re: HP 3par 7200 add new node

I could only find QR490A Cage part mentioned in the 7000 quick specs and in the options part page. So this QR490A should be the one.
https://h20195.www2.hpe.com/v2/getdocum ... =c04164476
https://support.hpe.com/hpsc/doc/public ... 841#N10195

H6Z26A Nowhere I can find this is compatible with 7000.

Author:  coolirc [ Tue Nov 27, 2018 9:43 am ]
Post subject:  Re: HP 3par 7200 add new node

yes that's why i'm asking it's weird that the reseller said it was obsolete and that the part number he stated was for HP Storage 8000 systems not 7000 ...
and it is stated nowhere on hpe website that the part number is obsolete ...

Author:  MammaGutt [ Tue Nov 27, 2018 12:37 pm ]
Post subject:  Re: HP 3par 7200 add new node

8000 cage has both different connector and specs (6gbps SAS vs 12gbps).

7000 cages should be available until 2020 according to 7000 end of life advisory.

Author:  coolirc [ Mon Apr 22, 2019 9:00 am ]
Post subject:  Re: HP 3par 7200 add new node

Hello Again i'm sorry but i would ask a question about cabling to experts , we bought a HP M6710 2.5 in 2U SAS drive enclosure but they did not deliver it with cables ...
is the HP 407344-003 is this the needed cable ?
HP 407344-003 2M (6.56FT) EXTERNAL MINI-SAS CABLE
i found by picturing the old 7200 installation so my question is if it is the needed cable where i should plug it
here's a picture of my current 3Par installation

Attachments:
IMG_20190422_141907.jpg
IMG_20190422_141907.jpg [ 1.78 MiB | Viewed 12726 times ]
IMG_20190422_141836.jpg
IMG_20190422_141836.jpg [ 1.55 MiB | Viewed 12726 times ]
IMG_20190422_141511.jpg
IMG_20190422_141511.jpg [ 2.04 MiB | Viewed 12726 times ]
IMG_20190422_141404.jpg
IMG_20190422_141404.jpg [ 2.16 MiB | Viewed 12726 times ]

Author:  terminus [ Tue Apr 23, 2019 4:33 am ]
Post subject:  Re: HP 3par 7200 add new node

look at this

https://h20628.www2.hp.com/km-ext/kmcsd ... 1589-1.pdf

Page 2 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/