| HPE Storage Users Group https://3parug.com/ |
|
| SSMC 3.4 Question https://3parug.com/viewtopic.php?f=18&t=2989 |
Page 1 of 2 |
| Author: | BryanW [ Thu Sep 20, 2018 10:29 am ] |
| Post subject: | SSMC 3.4 Question |
I don't see the 3.4 administrator guide yet and after deploying the OVF it is asking for a SSMC password - anyone know what the default user and pass is? |
|
| Author: | Kyle [ Thu Sep 20, 2018 2:28 pm ] |
| Post subject: | Re: SSMC 3.4 Question |
See links below: User Guide: https://support.hpe.com/hpsc/doc/public ... 53601en_us Release notes: https://support.hpe.com/hpsc/doc/public ... 53600en_us Admin guide: https://support.hpe.com/hpsc/doc/public ... 53598en_us I read in the release notes there some sort of migration procedure to follow if you want to transfer over settings. Post back and let us know if 3.4 is safe to upgrade to 
|
|
| Author: | cali [ Thu Sep 20, 2018 3:07 pm ] |
| Post subject: | Re: SSMC 3.4 Question |
Have Installed Yesterday a 3.4 with migration tool from 3.3 on ESX vCenter. And today a 3.4 as fresh Install. Both working smooth and I think faster. Infosight Integration need Proxy, did not find a point to enter a DNS Server. Ssmcadmin password is set during the Setup, or migrated from 3.3 with the Tool. Analytics and Advanced Analytics is also working. See no problems and you can use the old 3.3 and new 3.4 both. |
|
| Author: | Kyle [ Fri Sep 21, 2018 4:24 pm ] |
| Post subject: | Re: SSMC 3.4 Question |
I decided to go for it and did a migration from 3.3.1 to 3.4 without issue. I didn't have much except a few reports and they came over. I used a temporary IP and then powered off my windows vm so I could change the IP of the appliance to match my original one. I had to reboot to clear old IP and have it take the new one (maybe didnt' have to reboot but was easiest option at the time) Appliance does seem to be faster. For DNS, I didn't see it either but it's in the admin guide on page 63. You need to go via CLI to set NTP and DNS server. I just set one of each as it wasn't clear if you can set multiple. |
|
| Author: | cbuxton [ Mon Sep 24, 2018 6:01 am ] |
| Post subject: | Re: SSMC 3.4 Question |
I looked through the guides and didn't see any references as to what HPE URLs SSMC accesses. We have to make exceptions in the FW, so I'm not going to just open up the server to the whole internet. Anybody know? |
|
| Author: | cali [ Mon Sep 24, 2018 6:03 am ] |
| Post subject: | Re: SSMC 3.4 Question |
InfoSight.hpe.com |
|
| Author: | BryanW [ Mon Sep 24, 2018 11:43 am ] |
| Post subject: | Re: SSMC 3.4 Question |
Doh, I deployed the ESXi OVF and not the VC one, so it didn't prompt for the password and network config at the time of import. I blew it away and re-deployed. That's what I get for trying to deploy software before the admin guide is published... I'll let you guys know how it goes once it is all imported etc |
|
| Author: | cbuxton [ Tue Sep 25, 2018 3:49 am ] |
| Post subject: | Re: SSMC 3.4 Question |
cali wrote: InfoSight.hpe.com Usually there's a bit more information needed. As an example the Service Processor contact to HPE looks like this: HTTPS - 443 access storage-support.glb.itcs.hpe.com - DNS name which resolves to: storage-support1.itcs.hpe.com (16.248.72.63) or storage-support2.itcs.hpe.com (16.250.72.82) midway.ext.hpe.com - DNS name which resolves to: midway1-itg-mirror.houston.hpe.com (15.241.52.59) midway2-itg-mirror.houston.hpe.com (15.241.52.60) midway3-itg-mirror.houston.hpe.com (15.241.152.50) midway4-itg-mirror.houston.hpe.com (15.241.152.51) s54t0109g.sdc.ext.hpe.com (15.203.174.94) s54t0108g.sdc.ext.hpe.com (15.203.174.95) s54t0107g.sdc.ext.hpe.com (15.203.174.96) g4t8660g.houston.hpe.com (15.241.136.80) g9t6659g.houston.hpe.com (15.241.48.100) s79t0166g.sgp.ext.hpe.com (15.211.158.65) s79t0165g.sgp.ext.hpe.com (15.211.158.66) Remote access IPs: c4t18808.itcs.hpe.com (16.249.3.18) c4t18809.itcs.hpe.com (16.249.3.14) c9t18806.itcs.hpe.com (16.251.3.82) c9t18807.itcs.hpe.com (16.251.4.224) g4t2481g.houston.hp.com – (15.201.200.205) g4t2482g.houston.hp.com – (15.201.200.206) g9t1615g.houston.hp.com – (15.240.0.73) g9t1616g.houston.hp.com – (15.240.0.74) |
|
| Author: | SCQC [ Wed Oct 03, 2018 8:50 am ] |
| Post subject: | Re: SSMC 3.4 Question |
This is it need for the FW ports Client to WEB (appliance): 8443 Appliance to Storage Unit: 5783 |
|
| Author: | Kyle [ Wed Oct 03, 2018 1:18 pm ] |
| Post subject: | Re: SSMC 3.4 Question |
Is anyone able to get advanced analytics on an 8200 to work? I've got an 8200 and 8440 in SSMC (both all flash, both on 3.3.1 MU2 + patches). The 8440 seemed to work right away. The 8200 isn't showing any advanced analytics and the saturation/performance chart doesn't show up. I opened a case but it's going nowhere slowly. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|