Trying to help peers in our lab get the 3par 7200 back up and working.
It now able to be logged into via UI but one of the controllers is not booting (flashing amber light).
Errors .. besides the license ones...
####
Id : 6737 State : Resolved by System Message Code: 0x02d00fa Time : 2018-09-19 12:05:19 EDT Severity : Major Type : Component state change Component : hw_cage:1,hw_cage_ifc:0 Message : Cage 1, Interface Card 0 Failed (Interface Card Unknown {0x406})
Fixed by : Time : 2018-09-19 12:05:37 EDT Severity : Informational Type : Component state change Component : hw_cage:1,hw_cage_ifc:0 Message : Cage 1, Interface Card 0 Normal
Id : 6735 State : New Message Code: 0x02d00fa Repeat Count: Occurred 2 times, first at 2018-09-19 12:00:10 EDT Time : 2018-09-19 12:05:49 EDT Severity : Major Type : Component state change Component : hw_cage:0,hw_cage_ifc:0 Message : Cage 0, Interface Card 0 Failed (Interface Card Unknown {0x406})
Id : 6736 State : New Message Code: 0x02d00fa Repeat Count: Occurred 2 times, first at 2018-09-19 12:00:43 EDT Time : 2018-09-19 12:06:14 EDT Severity : Major Type : Component state change Component : hw_cage:0,hw_cage_ifc:1 Message : Cage 0, Interface Card 1 Failed (Interface Card Warning {0x403})
17 alerts 72001 cli% ##
My guess after doing this for a few years is 1) is battery on planer ok 2) is Cache battery ok.
Their is no data on this controller, so to wipe and rebuild is fine... just can't yet... find the commands.. though repair is always a good skill to know and use.
|