HPE Storage Users Group https://3parug.com/ |
|
FilePersona Block Mode PersonaProfile https://3parug.com/viewtopic.php?f=18&t=2555 |
Page 1 of 1 |
Author: | aberus [ Tue Jun 13, 2017 8:34 am ] |
Post subject: | FilePersona Block Mode PersonaProfile |
HPE has introduced a new PersonaProfile that depending on how your array is configured you made need to change each nodes mode from "block-only" to block-preferred" As of today this process is undocumented so I thought I would share it with everyone. When running "startfs -enable" you receive the following: "File Persona cannot be configured while the system is set to block-only mode. Please contact HPE Support for assistance." You verify that the license is present (showlicense) Preform the following steps: 1. showsys -param - at the bottom you will see "PersonaProfile : block-only" 2. shownode -PersonaProfile - This will show you that the block-perferred setting on each of the nodes is set to "block-only" 3. setsys PersonaProfile block-preferred 4. showsys -param - you will now see that the "PersonaProfile" has been changed to "block-preferred" If you check the nodes again you will see that they are all still set to "block-only" Reboot each of the nodes to enable the setting. 5. shutdownnode reboot <node#> - Use the "shownode" command to verify that the node is online before continuing tot he next node. 6. shownode -PersonaProfile - you will now see that the block-perferred policy is now set to block-perferred on all of the nodes. |
Author: | vChris [ Fri Aug 25, 2017 10:08 am ] |
Post subject: | Re: FilePersona Block Mode PersonaProfile |
Thanks for the info, very useful. |
Author: | adam [ Mon May 27, 2019 10:34 pm ] |
Post subject: | Re: FilePersona Block Mode PersonaProfile |
I tried to turn it on today but looks like there are some restrictions becuase of CPU contention. 8400 cli% setsys PersonaProfile block-preferred Error: File Persona cannot be used in conjunction with Compression or Asynchronous Remote Copy on HPE_3PAR 8400 series systems. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |