| HPE Storage Users Group https://3parug.com/ |
|
| RCFC @ 8Gbps? https://3parug.com/viewtopic.php?f=18&t=251 |
Page 1 of 1 |
| Author: | scottm [ Mon Jan 14, 2013 4:20 pm ] |
| Post subject: | RCFC @ 8Gbps? |
I must have missed something in the docs, and the engineer that was here for install must not have known. I just moved our RCFC ports over to an 8Gbps switch and when I went into the IMC to change the RCFC port to 8 Gbps I got an error stating the maximum rate supported in initiator mode is 4 Gbps. Is there something I am missing or is 4 Gbps the limit? |
|
| Author: | scottm [ Wed Jan 23, 2013 1:26 pm ] |
| Post subject: | Re: RCFC @ 8Gbps? |
My own error apparently I didn't read enough. According to an HP Storage Technical Consultant you need to completely remove Remote Copy to change port speeds. |
|
| Author: | Richard Siemers [ Wed Jan 23, 2013 4:09 pm ] |
| Post subject: | Re: RCFC @ 8Gbps? |
Interesting. So it can run at 8gb, but you have to tear down and rebuild the links to do it? |
|
| Author: | scottm [ Thu Jan 24, 2013 4:12 pm ] |
| Post subject: | Re: RCFC @ 8Gbps? |
Well that was what I was told. So I did that today, but still got the error that an initiator can only run at 4 Gbps, so I may have been duped. time to open a support ticket. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|