HPE Storage Users Group
https://3parug.com/

IMC 4.3 Released
https://3parug.com/viewtopic.php?f=18&t=245		 Page 1 of 1
Author:  Christian [ Wed Jan 09, 2013 4:24 pm ]
Post subject:  IMC 4.3 Released
There is a new version of IMC that can be downloaded from :
https://h20575.www2.hp.com/tsusbportal/ ... o?lc=EN_US

Haven't found a change log yet but the once i see clearly are:

*Bug with Remote Copy : When you create a new group and add volume you where not able to see the create target volume. This is now fixed.
*Peer Motion config added and should support any device running 3.1.2
*LDAP Configuration can now be done in GUI.
*Volume Creations now comes with the option to export volume to host after creation.
* Export Volume finally got a search option for both volumes and hosts.
* Added HP Logo :D
Author:  Richard Siemers [ Wed Jan 09, 2013 4:39 pm ]
Post subject:  Re: IMC 4.3 Released
Thanks Christian,

GUI for the LDAP should be nice, for that 1 time per install lifecycle it's needed :)
Author:  Christian [ Wed Jan 09, 2013 5:24 pm ]
Post subject:  Re: IMC 4.3 Released
Update:
* Tasks can now be Scheduled from GUI
* AO Config added for 3PARs running Inform OS 3.1.2

Also here is the HP 3PAR Management Console 4.3.0
Release Notes http://bizsupport2.austin.hp.com/bc/doc ... 606443.pdf
Author:  bigiron [ Mon Feb 11, 2013 12:09 am ]
Post subject:  Re: IMC 4.3 Released
Be very careful with IMC 4.3.0.71 when creating a new CPG.

When you create a new CPG, there is no more option to select the <Default> Step Size and it will automatically pick the lowest available value (32KiB) if you don't change it manually. RAID-5 default should be 128KiB.

here's the showcpg -sdg output of a CPG created using IMC 4.3.0.71

Code:
test-cpg-only    -     - 32768 -t r5 -ha cage -ssz 5 -ss 32 -ch first -p -devtype FC

To fix, edit the CPG in IMC and change the Step Size to 128KiB, it should change to this:

Code:
test-cpg-only    -     - 32768 -t r5 -ssz 5 -ss 128 -p -devtype FC

I opened a case w/ HP regarding this and they confirmed that it's a bug. There's also a customer advisory sent by HP today http://alerts.hp.com/r?2.1.3KT.2ZR.%5fA ... 5fRTEHca00

--Bigiron
Author:  scottm [ Tue Feb 12, 2013 12:11 pm ]
Post subject:  Re: IMC 4.3 Released
Good post, I ran into this last week and also heard about the bug from our SE. They are going to fix it in the next revision.
Author:  scottm [ Tue Feb 12, 2013 4:10 pm ]
Post subject:  Re: IMC 4.3 Released
Can anyone that has not updated tell me what the step size should be for RAID 6 NL with a set size of 6+2? All of the docs just say the step size for R6 depends on the set size.
Author:  Christian [ Thu Apr 18, 2013 5:27 am ]
Post subject:  Re: IMC 4.3 Released
Default is 128 with a set size of 8 ( 6+2 )
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/