HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Node assembly is in the wrong slot!
PostPosted: Sat Feb 24, 2024 6:10 pm 

Joined: Sun Apr 30, 2017 7:41 pm
Posts: 24
Hello everyone.
I have a problem with a 3PAR 8400 2 nodes.
node 0 failed.
I bought the same part used on Ebay.

I did the rescue process which is connecting to the new node via serial connection.

Whack>unset sys_serial_10
Whack>unset w19
Whack>ahci init
Whack>ahci erase
Whack>reset

It reboots the controller and when it starts it does not join the cluster.
This is how it ends...

1 17 8086.10d3 17.0.0 MB A 47 95 170 0x17 -> 0xfec01020
Timer Interrupt test: PASS
--> Starting: [10] CPU SDRAM ECC Initialization
--> Starting: [11] Board GPIO Init
--> Starting: [12] Node Fan Test
--> Starting: [14] Power Supply and Battery Init
--> Starting: [15] Power Supply and Battery Test
--> Starting: [16] PROM Checksum Test
PROM checksum: PASS
Invalid Tornado CPU core count - 12 for node type - 0xf0

*** Non-fatal error: Code 25, sub-code 0x5 (0).
Prom Node ID Value and Slot ID mismatch. NodeID: 1 SlotID: 0
Node assembly is in the wrong slot!

*** Fatal error: Code 25, sub-code 0x6 (0).
AHCI0 MBR does not have a valid partition table
Disabled FSBC boot watchdog.


I also did noderescue -node 0 from node 1 but without success.
Note: I am making it start without the 4-port HBA because it appears to be faulty.

any ideas?
Thank you very much as always.


Attachments:
Log-3PPAR.doc [88.5 KiB]
Downloaded 176 times
Top
 Profile  
Reply with quote  
 Post subject: Re: Node assembly is in the wrong slot!
PostPosted: Tue Feb 27, 2024 12:21 pm 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1571
Location: Europe
https://www.3parug.org/viewtopic.php?f=18&t=2139

see feldsam’s answer

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt