|HPE Storage Users Group
|Physical Copy/Snapclone takes forever
|Page 1 of 1|
|Author:||Tsukasa [ Tue Feb 14, 2017 11:44 am ]|
|Post subject:||Physical Copy/Snapclone takes forever|
Scenario: 2 Servers, Prod and Test.
There is a volume on prod that we need to duplicate an mount on the test box daily.
From my understanding this is now considered a physical copy compared to what use to be snapclone.
We need a fully functioning copy that has read/write access to the test box.
Currently it seems that below is the only way to do it but it takes 4+ hours for 400gb on an all flash array. Something seems wrong here. Is there a better way to do this or has HP really dropped the game on this.
removevvset -f (remove the current lun from the test box)
createvvcop -p (copy the prod lun)
createvvset -add (add back to test box set)
|Author:||Richard Siemers [ Wed Mar 01, 2017 8:39 am ]|
|Post subject:||Re: Physical Copy/Snapclone takes forever|
It sounds like you are doing a full lun copy instead of a snapshot, when you should be doing a snapshot. For a daily refresh, snapshots or in 3PAR terms VirtualCopy is the best answer, more specifically the updatevv command can save you some complexity.
|Page 1 of 1||All times are UTC - 5 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group