[ 31.682087] node_2_link_recv: 3 -1 -1 -1 -1 -1 -1 -1 [ 31.692094] link_send_2_node: -1 -1 -1 0 -1 -1 -1 -1 [ 31.702107] node_2_xcbq_send: 11 0 -1 -1 -1 -1 -1 -1 [ 31.712119] xcbq_2_node_send: 1 -1 1 -1 -1 -1 -1 -1 -1 -1 -1 0 -1 -1 -1 -1 [ 31.726054] ealink_2_dev_id: 0 0 0 0 0 0 0 [ 31.734317] node_2_dev_id: 0 0 0 0 0 0 0 0 [ 31.742589] node_2_dev_id_rmt: 0 0 0 0 0 0 0 0 [ 31.751552] link_2_link_lpbk: 1 0 3 2 5 4 7 [ 31.759976] xcbadr_2_xcbq: 2 0 4 -1 [ 31.766982] xcbadr_2_pcibus: 0 1 2 -1 [ 31.774363] Initial default mapping complete [ 31.782847] CP: 2way-CP 7200 [ 31.788566] harlink_ctl_root: 255 255 255 0 255 255 255 [ 31.799926] BIOS reports CM dimms 2, CM dimm mask 0X0003, total CM mem 4096MB [ 31.814110] CM DIMM0: J0300 2048MB, interleaved 00:00000000 to 01:00000000, S/N dc9bd03c, ASIC 0 [ 31.831575] CM DIMM0: intlv 0:2, slot 0, bank 0, rank 0 [ 31.841957] CM DIMM1: J0301 2048MB, interleaved 00:00000000 to 01:00000000, S/N dc9bd03d, ASIC 0 [ 31.859422] CM DIMM1: intlv 0:2, slot 1, bank 0, rank 0 [ 31.869813] Info cluster_mem_setup_rsvd - total cm size 0x100000000, [ 31.869814] device mem size 0x100000000, 0x0 [ 31.894694] CM: prefill memory from 0x40000000000(0x200000 blocks) and 0x40001600000(0x1fd40000 blocks) using xcbq[0] [ 33.750935] Clear Cluster Memory in 1858ms [ 33.881508] Info: total eagle memory: 0x100000000 B [ 33.881510] Info: cache memory left : 0xf0000000 B [ 33.900720] Info: scratch buffer : 0x40000204000, 0xc000B [ 33.900720] Info: control structures: 0x10000000 bytes (0x100MB) [ 33.923898] Info: eagle_init_cmp: cmp_init with [ 33.932899] ***ASIC 0*** [ 33.938620] mirsz: 0x8000000, non_mirr_sz: 0xf0000000 [ 33.949348] tpci_pa: 0xc08000000, ea_pa: 0x40008000000 [ 33.960250] local_pa: 0xc10000000 - 0xd00000000 [ 33.969617] local_eapa: 0x40010000000 - 0x40100000000 [ 33.980737] cmp_init: min_lru_scan_try 16 [ 33.988796] CMP: Number of Cluster Memory Pages 253952 [ 34.039021] CMP: allocated: 104 MB bytes at 0xffffc90041984000 for cmp structures [ 34.053910] CMP: PCI Address Mirror: 0x00000c08000000 Local: 0x00000c10000000 [ 34.068476] CMP: Eagle Address Mirror: 0x00040008000000 Local: 0x00040010000000 [ 34.083048] CMP: Eagle Address Start: 0x00040008000000 End: 0x00040100000000 [ 34.097576] CMP: Page Count Mirror: 0x00000000002000 Local: 0x0000000003c000 [ 34.114580] CMP: PFN Start Mirror: 0x00402000 Local: 0x00404000 [ 34.274061] ea_gbpool_init 128 pools [ 34.282702] Set xcbq_shutdown to 1 for node 0 [ 34.291377] *** eagle_setup_mir_record: HW mirror is enabled. [ 34.303265] Processing profile = 0 [ 34.310021] tpd_cpu_mem_ksz: system RAM is 8145088k [ 34.327677] Processing profile = 0 [ 34.354204] *** rm_init_config: initializing remote mirror configuration [ 34.368710] Number of rm_async_vv_resp threads = 7 [ 34.386465] Number of rm_async_send_ios threads = 50 [ 34.399041] PSM psm_receive_sub_set_totals_thread create SUCCESS [ 34.411154] PSM psm_handle_sub_set_totals_thread create SUCCESS [ 34.423093] PSM psm_request_sub_set_totals_thread create SUCCESS [ 34.435067] ssm_init: Initializing secondary set manager [ 34.467645] sssm_init: entry [ 34.473729] sssm_apply_thread: starting [info 0xffffffffa17c9f00] [ 34.473924] sssm_apply_thread: starting [info 0xffffffffa17c9f98] [ 34.474106] sssm_apply_thread: starting [info 0xffffffffa17ca030] [ 34.474277] sssm_apply_thread: starting [info 0xffffffffa17ca0c8] [ 34.474450] sssm_apply_thread: starting [info 0xffffffffa17ca160] [ 34.474629] sssm_apply_thread: starting [info 0xffffffffa17ca1f8] [ 34.474807] sssm_apply_thread: starting [info 0xffffffffa17ca290] [ 34.474977] sssm_apply_thread: starting [info 0xffffffffa17ca328] [ 34.475151] sssm_obj_thread: started, info [0xffffffffa184ab00] [ 34.475320] sssm_obj_thread: started, info [0xffffffffa184ab10] [ 34.475491] sssm_obj_thread: started, info [0xffffffffa184ab20] [ 34.475660] sssm_obj_thread: started, info [0xffffffffa184ab30] [ 34.475836] sssm_obj_thread: started, info [0xffffffffa184ab40] [ 34.476005] sssm_obj_thread: started, info [0xffffffffa184ab50] [ 34.476175] sssm_obj_thread: started, info [0xffffffffa184ab60] [ 34.476343] sssm_obj_thread: started, info [0xffffffffa184ab70] [ 34.476789] sssm_init: exit [ 34.477231] LB rmm_lb_thread create SUCCESS [ 34.477448] BTL trace thread create SUCCESS [ 34.484407] CRDIT: allocate 122880 wait cache entries [ 34.489503] Info: global_tpd_init: cmp_start_threads... [ 34.827384] Shutdown thread: 7928 [ 34.849317] CMP cooldown is now 1800 [ 34.856436] CMP deduction is now 0 [ 34.863200] CMP interval is now 600 [ 34.870134] CMP threshold is now 60 [ 34.892685] Processing profile = 0 [ 34.899977] PF: pf_dblk_sz 512, pf_dpage_sz 16384 [ 34.909332] PF: pfail_init_offsets start of dynamic offset 0x105a03000 [ 35.013588] BIOS page addr 0xffff880000049000 [ 35.030386] PCI slot 0: LSI-SAS 9205-8e 1000.0087 0a.00.0 1 24 FCAL [ 35.045610] PCI slot 1: Emulex LPe12002 10df.f100 0b.00.* 2 25 FCAL [ 35.060660] PCI slot 2: Emulex LPe12004 10df.f100 06-07.**.* 4 26 FCAL [ 35.084315] IDE0: SanDisk DX110128A5xnNMRI 140903414267 X231600 125 GB [ 35.100056] BIOS reports control cache is 2040 MB [ 35.109416] BIOS indicates 8 CPUs expected [ 35.134171] tpd_file_read error = -9 [ 35.141285] mfg_hp_readfile: no EEPROM update [ 35.289913] Hardware Revision: 004 [ 35.296843] Part Identifier: HP_3PAR 7200 [ 35.306883] World Wide Name: 1000000000000000 [ 35.315538] Assembly Serial Number: PCMBUB2TM6D0MV [ 35.325406] Assembly Part Number: QR482-63001 [ 35.334927] Saleable Serial Number: 0000000000 [ 35.344102] Saleable Product Number: QR482A [ 35.354141] Spare Part Number: 683245-001 [ 35.366887] Initialized serial link for EOS [ 35.375207] __assign_irq: reassignflag 0 irq 23 old_vector 0x79 move_in_progress 0 cfg->domain ff mask ff [ 35.394237] Internal Serial: install intr fpga-serial(3) on irq 23 [ 35.406522] Internal Serial: initialize UART ports [ 35.416043] FPGA Serial Port 0 at pci 0xffffc90011f80400 [ 35.426611] FPGA Serial Port 1 at pci 0xffffc90011f80420 [ 35.437178] FPGA Serial Port 2 at pci 0xffffc90011f80440 [ 35.447751] Enable serial interrupts [ 35.454871] Har power to 0xff: 1 [ 35.461299] before enabling error interrupt [ 35.469651] After enabling error interrupt [ 35.482230] init_tpd_main: starting SCSI initialization [ 35.495723] gfc_cache_create: cache_slot[0]: ffff88027b43f000 size 8 name tpd_gfc-8 [ 35.511195] gfc_cache_create: cache_slot[1]: ffff88027b43f800 size 16 name tpd_gfc-16 [ 35.526992] gfc_cache_create: cache_slot[2]: ffff880221a68000 size 32 name tpd_gfc-32 [ 35.542785] gfc_cache_create: cache_slot[3]: ffff880221a68400 size 64 name tpd_gfc-64 [ 35.558585] gfc_cache_create: cache_slot[4]: ffff880221a68800 size 128 name tpd_gfc-128 [ 35.574746] gfc_cache_create: cache_slot[5]: ffff880221a68c00 size 256 name tpd_gfc-256 [ 35.590885] gfc_cache_create: cache_slot[6]: ffff880221a69000 size 512 name tpd_gfc-512 [ 35.607024] gfc_cache_create: cache_slot[7]: ffff880221a69400 size 1024 name tpd_gfc-1k [ 35.622993] gfc_cache_create: cache_slot[8]: ffff880221a69800 size 2048 name tpd_gfc-2k [ 35.638957] gfc_cache_create: cache_slot[9]: ffff880221a69c00 size 4096 name tpd_gfc-4k [ 35.654909] gfc_cache_create: cache_slot[10]: ffff880221a6a000 size 8192 name tpd_gfc-8k [ 35.671042] gfc_cache_create: cache_slot[11]: ffff880221a6a400 size 16384 name tpd_gfc-16k [ 35.687497] gfc_cache_create: cache_slot[12]: ffff880221a6a800 size 32768 name tpd_gfc-32k [ 35.703950] gfc_cache_create: cache_slot[13]: ffff880221a6ac00 size 65536 name tpd_gfc-64k [ 35.720415] gfc_cache_create: cache_slot[14]: ffff880221a6b000 size 131072 name tpd_gfc-128k [ 35.737215] gfc_cache_create: cache_slot[15]: ffff880221a6b400 size 262144 name tpd_gfc-256k [ 35.754015] gfc_cache_create: cache_slot[16]: ffff880221a6b800 size 524288 name tpd_gfc-512k [ 35.770834] gfc_cache_create: cache_slot[17]: ffff880221a6bc00 size 1048576 name tpd_gfc-1m [ 35.787480] QLFCG2: found 0 devices [ 35.794615] QLIS: found 0 devices [ 35.801380] Found SAS Device. ID: 0x0087. Slot: 0, Slot_Cnt: 1. Port_Cnt: 2. Dev_Indx: 1. SubSys: 0x3000. Bus: 10. pdev: ffff88027c105800. [ 35.828100] pci 0000:0a:00.0: no parent: BAR 0 [io 0x4000-0x40ff] [ 35.834514] File /opt/tpd/fw/hba/emfc/emfw-f100: Finished processing [ 35.836806] pci 0000:0b:00.0: no parent: BAR 0 [mem 0xc0108000-0xc0108fff 64bit] [ 35.836808] pci 0000:0b:00.0: no parent: BAR 2 [mem 0xc0100000-0xc0103fff 64bit] [ 35.836811] pci 0000:0b:00.0: no parent: BAR 4 [io 0x3100-0x31ff] [ 35.836827] __io_apic_set_pci_routing:0000:0b:00.0 irq 25 cfg->vector = 0x0 node = 0 [ 35.836829] __assign_irq: reassignflag 0 irq 25 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 35.836834] pci 0000:06:00.0: no parent: BAR 0 [mem 0xc0508000-0xc0508fff 64bit] [ 35.836836] get_IO_APIC_vector: irq = 25 vector = 34 [ 35.836838] pci 0000:06:00.0: no parent: BAR 2 [mem 0xc0500000-0xc0503fff 64bit] [ 35.836840] IOAPIC found irq=25 vector=0x34 mask=0xff domain=0xff oldvec=0x0 [ 35.836843] pci 0000:06:00.0: no parent: BAR 4 [io 0x6100-0x61ff] [ 35.836854] __io_apic_set_pci_routing:0000:06:00.0 irq 26 cfg->vector = 0x0 node = 0 [ 35.836856] pci 0000:0b:00.0: PCI->APIC IRQ transform: INT A -> IRQ 25 [ 35.836858] __assign_irq: reassignflag 0 irq 26 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 35.836860] get_IO_APIC_vector: irq = 26 vector = 36 [ 35.836862] IOAPIC found irq=26 vector=0x36 mask=0xff domain=0xff oldvec=0x0 [ 35.836873] pci 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 26 [ 35.836889] arch_setup_msi_irqs_n: 0000:0b:00.0 pcidev ffff88027c106000 irq 25 vector = 0x34 nvec = 0 ndesc = 1 node 0 vnum -1 [ 35.836892] __assign_irq: reassignflag 0 irq 25 old_vector 0x34 move_in_progress 0 cfg->domain ff mask ff [ 35.836894] _create_irq_nr: irq_want 25 irq 25 reassignflag 0 nr_irqs_next 118 caller's vector 0x34 new vector 0x34 node 0 cfg->domain ff [ 35.836897] __assign_irq: reassignflag 0 irq 25 old_vector 0x34 move_in_progress 0 cfg->domain ff mask ff [ 35.836900] msi_compose_msg: irq 25 dest 0xf0f domain 0xff [ 35.836911] arch_setup_msi_irqs_n: 0000:06:00.0 pcidev ffff88027c102800 irq 26 vector = 0x36 nvec = 0 ndesc = 1 node 0 vnum -1 [ 35.836914] __assign_irq: reassignflag 0 irq 26 old_vector 0x36 move_in_progress 0 cfg->domain ff mask ff [ 35.836918] _create_irq_nr: irq_want 26 irq 26 reassignflag 0 nr_irqs_next 118 caller's vector 0x36 new vector 0x36 node 0 cfg->domain ff [ 35.836921] __assign_irq: reassignflag 0 irq 26 old_vector 0x36 move_in_progress 0 cfg->domain ff mask ff [ 35.836923] msi_compose_msg: irq 26 dest 0xf0f domain 0xff [ 35.836949] har_pci2bus: Slot 1 Port 1 Type FC assigned to LPC 2 [ 35.836967] har_pci2bus: Slot 2 Port 1 Type FC assigned to LPC 0 [ 35.964942] Set xcbq_shutdown to 0 for node 0 [ 35.964971] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 35.964989] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 36.360357] __assign_irq: reassignflag 0 irq 25 old_vector 0x34 move_in_progress 0 cfg->domain ff mask ff [ 36.360379] pci 0000:0a:00.0: no parent: BAR 1 [mem 0xc0240000-0xc024ffff 64bit] [ 36.360382] pci 0000:0a:00.0: no parent: BAR 3 [mem 0xc0200000-0xc023ffff 64bit] [ 36.360395] __io_apic_set_pci_routing:0000:0a:00.0 irq 24 cfg->vector = 0x0 node = 0 [ 36.424148] __assign_irq: reassignflag 0 irq 26 old_vector 0x36 move_in_progress 0 cfg->domain ff mask ff [ 36.443164] __assign_irq: reassignflag 0 irq 24 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 36.462008] get_IO_APIC_vector: irq = 24 vector = 33 [ 36.471867] IOAPIC found irq=24 vector=0x33 mask=0xff domain=0xff oldvec=0x0 [ 36.485918] pci 0000:0a:00.0: PCI->APIC IRQ transform: INT A -> IRQ 24 [ 36.498953] arch_setup_msi_irqs_n: 0000:0a:00.0 pcidev ffff88027c105800 irq 24 vector = 0x33 nvec = 0 ndesc = 3 node 0 vnum -1 [ 36.521614] __assign_irq: reassignflag 0 irq 24 old_vector 0x33 move_in_progress 0 cfg->domain ff mask ff [ 36.540649] _create_irq_nr: irq_want 24 irq 24 reassignflag 0 nr_irqs_next 118 caller's vector 0x33 new vector 0x33 node 0 cfg->domain ff [ 36.565198] __assign_irq: reassignflag 0 irq 24 old_vector 0x33 move_in_progress 0 cfg->domain ff mask ff [ 36.584219] msi_compose_msg: irq 24 dest 0xf0f domain 0xff [ 36.595127] arch_setup_msi_irqs_n: 0000:0a:00.0 pcidev ffff88027c105800 irq 24 vector = 0x33 nvec = 0 ndesc = 3 node 0 vnum -1 [ 36.617792] __assign_irq: reassignflag 1 irq 118 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 36.636805] IOAPIC bios reserved irq=118 vector=0x32 [ 36.646664] IOAPIC found irq=118 vector=0x32 mask=0xff domain=0xff oldvec=0x0 [ 36.660869] _create_irq_nr: irq_want 24 irq 118 reassignflag 1 nr_irqs_next 119 caller's vector 0x33 new vector 0x32 node 0 cfg->domain ff [ 36.685593] __assign_irq: reassignflag 0 irq 118 old_vector 0x32 move_in_progress 0 cfg->domain ff mask ff [ 36.704784] msi_compose_msg: irq 118 dest 0xf0f domain 0xff [ 36.715902] __assign_irq: reassignflag 0 irq 24 old_vector 0x33 move_in_progress 0 cfg->domain ff mask ff [ 36.734961] __assign_irq: reassignflag 0 irq 118 old_vector 0x32 move_in_progress 0 cfg->domain ff mask ff [ 37.139683] har_pci2bus: Slot 0 Port 1 Type SAS assigned to LPC 0 [ 37.189685] Port 1:0:1 - llss ffff880220990000 port ffffc90028ed1000 HBA Type 9205-8e Memory c0240000 IRQ 24 Bus #0 FW rev 17.11.0.0 [Initiator Mode] [ 37.217498] har_pci2bus: Slot 0 Port 2 Type SAS assigned to LPC 2 [ 37.634911] Port 1:1:1 - emh ffff880220248000 HBA Type f100 Port ffffc900126a8000 IRQ 25 Bus #2 Port 1:1:1 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 37.664671] Port 1:1:1 - request for ioctl 0x67 [ 37.671928] Port 1:2:1 - emh ffff880220258000 HBA Type f100 Port ffffc900126b0000 IRQ 26 Bus #0 Port 1:2:1 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 37.672777] Port 1:2:1 - request for ioctl 0x67 [ 37.674411] pci 0000:06:00.1: no parent: BAR 0 [mem 0xc0509000-0xc0509fff 64bit] [ 37.674413] pci 0000:06:00.1: no parent: BAR 2 [mem 0xc0504000-0xc0507fff 64bit] [ 37.674415] pci 0000:06:00.1: no parent: BAR 4 [io 0x6000-0x60ff] [ 37.674428] __io_apic_set_pci_routing:0000:06:00.1 irq 35 cfg->vector = 0x0 node = 0 [ 37.674430] __assign_irq: reassignflag 0 irq 35 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 37.674432] get_IO_APIC_vector: irq = 35 vector = 39 [ 37.674434] IOAPIC found irq=35 vector=0x39 mask=0xff domain=0xff oldvec=0x0 [ 37.674446] pci 0000:06:00.1: PCI->APIC IRQ transform: INT B -> IRQ 35 [ 37.674477] arch_setup_msi_irqs_n: 0000:06:00.1 pcidev ffff88027c103000 irq 35 vector = 0x39 nvec = 0 ndesc = 1 node 0 vnum -1 [ 37.674480] __assign_irq: reassignflag 0 irq 35 old_vector 0x39 move_in_progress 0 cfg->domain ff mask ff [ 37.674483] _create_irq_nr: irq_want 35 irq 35 reassignflag 0 nr_irqs_next 119 caller's vector 0x39 new vector 0x39 node 0 cfg->domain ff [ 37.674487] __assign_irq: reassignflag 0 irq 35 old_vector 0x39 move_in_progress 0 cfg->domain ff mask ff [ 37.674489] msi_compose_msg: irq 35 dest 0xf0f domain 0xff [ 37.674527] har_pci2bus: Slot 2 Port 2 Type FC assigned to LPC 2 [ 37.932635] __assign_irq: reassignflag 0 irq 35 old_vector 0x39 move_in_progress 0 cfg->domain ff mask ff [ 37.934283] pci 0000:0b:00.1: no parent: BAR 0 [mem 0xc0109000-0xc0109fff 64bit] [ 37.934286] pci 0000:0b:00.1: no parent: BAR 2 [mem 0xc0104000-0xc0107fff 64bit] [ 37.934287] pci 0000:0b:00.1: no parent: BAR 4 [io 0x3000-0x30ff] [ 37.934297] __io_apic_set_pci_routing:0000:0b:00.1 irq 34 cfg->vector = 0x0 node = 0 [ 38.008701] __assign_irq: reassignflag 0 irq 34 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 38.027544] get_IO_APIC_vector: irq = 34 vector = 37 [ 38.037402] IOAPIC found irq=34 vector=0x37 mask=0xff domain=0xff oldvec=0x0 [ 38.051446] pci 0000:0b:00.1: PCI->APIC IRQ transform: INT B -> IRQ 34 [ 38.064444] arch_setup_msi_irqs_n: 0000:0b:00.1 pcidev ffff88027c106800 irq 34 vector = 0x37 nvec = 0 ndesc = 1 node 0 vnum -1 [ 38.087090] __assign_irq: reassignflag 0 irq 34 old_vector 0x37 move_in_progress 0 cfg->domain ff mask ff [ 38.106109] _create_irq_nr: irq_want 34 irq 34 reassignflag 0 nr_irqs_next 119 caller's vector 0x37 new vector 0x37 node 0 cfg->domain ff [ 38.130675] __assign_irq: reassignflag 0 irq 34 old_vector 0x37 move_in_progress 0 cfg->domain ff mask ff [ 38.149694] msi_compose_msg: irq 34 dest 0xf0f domain 0xff [ 38.160626] har_pci2bus: Slot 1 Port 2 Type FC assigned to LPC 0 [ 38.172601] __assign_irq: reassignflag 0 irq 34 old_vector 0x37 move_in_progress 0 cfg->domain ff mask ff [ 39.274190] Port 1:2:2 - emh ffff88021f578000 HBA Type f100 Port ffffc900126b8000 IRQ 35 Bus #2 Port 1:2:2 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 39.303985] Port 1:2:2 - request for ioctl 0x67 [ 39.315004] pci 0000:07:00.0: no parent: BAR 0 [mem 0xc0408000-0xc0408fff 64bit] [ 39.329731] pci 0000:07:00.0: no parent: BAR 2 [mem 0xc0400000-0xc0403fff 64bit] [ 39.344437] pci 0000:07:00.0: no parent: BAR 4 [io 0x5100-0x51ff] [ 39.356727] Pin 9-2 already programmed [ 39.364176] pci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 26 [ 39.377184] arch_setup_msi_irqs_n: 0000:07:00.0 pcidev ffff88027c103800 irq 26 vector = 0x36 nvec = 0 ndesc = 1 node 0 vnum -1 [ 39.399839] __assign_irq: reassignflag 1 irq 119 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 39.410022] Port 1:1:2 - emh ffff88021f1e0000 HBA Type f100 Port ffffc900146e8000 IRQ 34 Bus #0 Port 1:1:2 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 39.410888] Port 1:1:2 - request for ioctl 0x67 [ 39.456881] IOAPIC bios reserved irq=119 vector=0x35 [ 39.466740] IOAPIC found irq=119 vector=0x35 mask=0xff domain=0xff oldvec=0x0 [ 39.480950] _create_irq_nr: irq_want 26 irq 119 reassignflag 1 nr_irqs_next 120 caller's vector 0x36 new vector 0x35 node 0 cfg->domain ff [ 39.505679] __assign_irq: reassignflag 0 irq 119 old_vector 0x35 move_in_progress 0 cfg->domain ff mask ff [ 39.524898] msi_compose_msg: irq 119 dest 0xf0f domain 0xff [ 39.536014] har_pci2bus: Slot 2 Port 3 Type FC assigned to LPC 2 [ 39.548013] __assign_irq: reassignflag 0 irq 119 old_vector 0x35 move_in_progress 0 cfg->domain ff mask ff [ 40.832498] Port 1:2:3 - emh ffff88021e870000 HBA Type f100 Port ffffc900146f0000 IRQ 119 Bus #2 Port 1:2:3 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 40.862434] Port 1:2:3 - request for ioctl 0x67 [ 40.872891] pci 0000:07:00.1: no parent: BAR 0 [mem 0xc0409000-0xc0409fff 64bit] [ 40.887594] pci 0000:07:00.1: no parent: BAR 2 [mem 0xc0404000-0xc0407fff 64bit] [ 40.902297] pci 0000:07:00.1: no parent: BAR 4 [io 0x5000-0x50ff] [ 40.914601] Pin 9-11 already programmed [ 40.922243] pci 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 35 [ 40.935248] arch_setup_msi_irqs_n: 0000:07:00.1 pcidev ffff88027c104000 irq 35 vector = 0x39 nvec = 0 ndesc = 1 node 0 vnum -1 [ 40.957904] __assign_irq: reassignflag 1 irq 120 old_vector 0x0 move_in_progress 0 cfg->domain ff mask ff [ 40.976920] IOAPIC bios reserved irq=120 vector=0x38 [ 40.986780] IOAPIC found irq=120 vector=0x38 mask=0xff domain=0xff oldvec=0x0 [ 41.000976] _create_irq_nr: irq_want 35 irq 120 reassignflag 1 nr_irqs_next 121 caller's vector 0x39 new vector 0x38 node 0 cfg->domain ff [ 41.025723] __assign_irq: reassignflag 0 irq 120 old_vector 0x38 move_in_progress 0 cfg->domain ff mask ff [ 41.044915] msi_compose_msg: irq 120 dest 0xf0f domain 0xff [ 41.056031] har_pci2bus: Slot 2 Port 4 Type FC assigned to LPC 0 [ 41.068031] __assign_irq: reassignflag 0 irq 120 old_vector 0x38 move_in_progress 0 cfg->domain ff mask ff [ 42.352819] Port 1:2:4 - emh ffff88021e690000 HBA Type f100 Port ffffc900146f8000 IRQ 120 Bus #0 Port 1:2:4 - FW rev 2.10.X.3; not initialized [Suspended Mode] [ 42.382729] Port 1:2:4 - request for ioctl 0x67 [ 42.552908] CM Error: Link 3 to node 0 (step 9 DOWN): Link 3 to node 0 err_sts 0x1 err_id 0x20 (itr 0) [ 42.552910] [ 42.575551] Set xcbq_shutdown to 1 for node 0 [ 42.638891] Set xcbq_shutdown to 0 for node 0 [ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 44.982799] Port 1:0:2 - llss port ffffc90030f27000 [Initiator Mode] [ 44.995859] SCSI install done (9508ms taken) [ 45.004841] BIOS indicates 8 CPUs expected [ 45.018831] Started eagle_cm_patrol_thread pid 0x21e6 [ 45.018834] Total CM for this node is 4 GB [ 45.018838] patrol_delay 4614 msecs [ 45.018850] Starting eagle_cm_patrol_thread.... [ 45.018853] Num Srcs 14 Src Size 16384 [ 45.060562] Starting scan mir log thread 0x226b [ 45.060564] Setting recovery log scan delay to 292 ms init: Loading tpd kernel module: done. init: Remapping interrupts init: WARNING: irq name contains comma delimited list [aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv] init: WARNING: irq name contains comma delimited list [nemoe 0x78, Eos intr] init: Loading tpd kernel patch modules: Patch99 Patch110 Patch114 P119 Patch135 Patch138 Patch139 Patch142 Patch149 Patch160 Patch165 init: Configuring powerfail device /dev/pfail_storage: 801 init: done. init: Initializing eanet0: done. init: Rotating PM logs: done. init: Rotating PR event logs: done. init: Starting Process Manager: pm. init: Rotating pr_sync_ide logs: done. init: Starting PR Sync IDE: pr_sync_ide. init: coreman: tpdinit run at epoch=1664819228sec with boot at epoch=1664819176sec init: coreman: file system usage - /dev/sda7 - used=15227584KB (used-core=172KB) free=46257040KB total=61484624KB init: coreman: space removal targets - freeMin=0KB freePct=0KB corePct=0KB targetToRemove=0KB targetToRemoveMinLow=0KB init: coreman: exit - no free space requirements to satisfy init: Launching tpd_cfg_tornado_dcncage script to work around 'Configures a Tornado Enclosures DP-1 port' issue init: Running l 3PAR(R) InForm(tm) OS 3.2.2.709 1612423-1 ttyS0 1612423-1 login: