Hello,
I have 3PAR 7400c.
Service Processor 5.0.2.0-23974, 3PAR OS 3.3.1.215 (GA)+P01,P02,P04,P06,P13,P16
After executing the command "checkhealth -detail":
Code:
Host Port:1:1:1 Port WWN not found on FC Fabric attached to Port:0:1:1
Host Port:0:1:2 Port WWN not found on FC Fabric attached to Port:1:1:2
Code:
showport
=====================================
N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner FailoverState
0:1:1 target ready 2FF70002AC015BCE 20110002AC015BCE host FC c7000 b1 x1 1:1:1 none
0:1:2 target ready 2FF70002AC015BCE 20120002AC015BCE host FC c7000 b2 x2 1:1:2 none
1:1:1 target ready 2FF70002AC015BCE 21110002AC015BCE host FC c7000 b2 x1 0:1:1 none
1:1:2 target ready 2FF70002AC015BCE 21120002AC015BCE host FC c7000 b1 x2 0:1:2 none
-------------------------------------------------------------------------------------------------------------
3PAR connected directly (Direct Attach) to the Virtual Connection:
Port 0:1:1 -> c7000 Bay1 Port X1
Port 0:1:2 -> c7000 Bay2 Port X2
Port 1:1:1 -> c7000 Bay2 Port X1
Port 1:1:2 -> c7000 Bay1 Port X2
All servers successfully apply profiles. In Windows all connected drives are visible.
What is this error and how fix it?
Thanks!