Code:
movech -perm -ovrd 96:1063
will remove your current error message.
There might be more of them
Code:
showpdch -mov
or
Code:
showpdch 89
might sched some light on what you're facing.
| HPE Storage Users Group https://3parug.com/ |
|
| Error : Pd id 89 is referenced by chunklet 96:1063 https://3parug.com/viewtopic.php?f=18&t=3907 |
Page 1 of 1 |
| Author: | Juliano [ Thu Jun 29, 2023 7:08 am ] |
| Post subject: | Error : Pd id 89 is referenced by chunklet 96:1063 |
Hello there, During a simple change disk replace some was occured unexpectly (to me): Verified failed disk: cli% showpd -failed -degraded --Size(MB)-- ----Ports---- Id CagePos Type RPM State Total Free A B Capacity(GB) 89 3:23:0? FC 10 failed 1142784 0 ----- ----- 1200 ------------------------------------------------------------------ 1 total 1142784 0 Verified non-failed chunklets: cli% showpd -space 89 ------------------(MB)------------------- Id CagePos Type -State- Size Volume Spare Free Unavail Failed 89 3:23:0? FC failed 1142784 0 0 0 0 1142784 ----------------------------------------------------------------- 1 total 1142784 0 0 0 0 1142784 Verified servicemag status: cli% servicemag status No servicemag operations logged. Ok: it's time to replace disk: disk changed in position 3:23:0 (it was removed failed ID89 and new one has received ID82) cli% showpd -i Id CagePos State ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType -----AdmissionTime----- ... 82 3:23:0 normal 5000CCA0438327B3 HITACHI HCBRE0900GBAS10K KVJA41KR 3P02 SAS Magnetic 2023-06-22 10:15:56 -03 ... 89 3:23:0? failed 5000CCA02D5CB43B HGST HCBF1200S5xeN010 06HMZHKA 3P05 SAS Magnetic 2017-06-24 12:01:22 -03 ... 120 2:11:0 normal 5000CCA0717525E7 HITACHI HCBRE0900GBAS10K W8J2E7MG 3P02 SAS Magnetic 2017-08-03 10:22:26 -03 ------------------------------------------------------------------------------------------------------------------------- 121 total Ok, lets delete old ID: cli% dismisspd 89 Error : Pd id 89 is referenced by chunklet 96:1063 Failed. Deeping info: cli% showpd -c 89 ------- Normal Chunklets -------- ---- Spare Chunklets ---- - Used - -------- Unused -------- - Used - ---- Unused ---- Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail 89 3:23:0? FC failed 1116 0 0 0 568 0 548 0 0 0 0 0 ---------------------------------------------------------------------------------------- 1 total 1116 0 0 0 568 0 548 0 0 0 0 0 cli% showpdch 89 No chunklet information available. For my surprise, there are some chuncklets in "normal" state. The old disk was removed and the new one is "normal" at this time. What is possible do to remove the old disk ID89? Best Regards, Juliano Flores |
|
| Author: | MammaGutt [ Fri Jun 30, 2023 1:01 am ] |
| Post subject: | Re: Error : Pd id 89 is referenced by chunklet 96:1063 |
Code: movech -perm -ovrd 96:1063 will remove your current error message. There might be more of them Code: showpdch -mov or Code: showpdch 89 might sched some light on what you're facing. |
|
| Author: | Juliano [ Fri Jun 30, 2023 12:25 pm ] |
| Post subject: | Re: Error : Pd id 89 is referenced by chunklet 96:1063 |
Hello, MAmmaGutt! You're correct! Problem solved! cli% movech -perm -ovrd 96:1063 Are you sure you want to move the chunklets? select q=quit y=yes n=no: y Move -State- -Detailed_State- 96:1063-8:78 normal normal cli% dismisspd 89 Error : Pd id 89 is referenced by chunklet 96:1064 .... I was lucky: repeting "movech" for more 10x, "dismisspd" has accepted and the old ID was removed permanently. Thank you a lot! Best Regards, Juliano |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|