I have updated both w19 and Saleable Serial Num, ran prom checksum (returned PASS) and perfomed whack - reset.
During startup i enter whack again and see updated values in place but when running "prom checksum" again I get
Code:
Whack>prom checksum
PROM checksum: PASS
Invalid Tornado CPU core count - 0 for node type - 0x40
*** Non-fatal error: Code 25, sub-code 0x5 (0).
Checkin cpuid I see 1428L
Code:
Whack>cpu id
Found CPU ID string 'GenuineIntel'
Intel(R) Xeon(R) CPU E5-1428L v2 @ 2.20GHz
Family 6, Model 62, Stepping 4, Features bfebfbff:3
Data TLB: 1GB Pages, 4 entries
Data TLB: 4K Pages, 64 entries
Inst TLB: 2M or 4M Pages, 8 entries
Inst TLB: 4K Pages, 64 entries
64-Byte Prefetching
Shared TLB: 4K Pages, 512 entries
CPUID[ 0] == 0000000d 756e6547 6c65746e 49656e69
CPUID[ 1] == 000306e4 00200800 77bee3ff bfebfbff
CPUID[ 2] == 76036301 00f0b2ff 00000000 00ca0000
CPUID[ 3] == 00000000 00000000 00000000 00000000
CPUID[ 4] == 00000000 00000000 00000000 00000000
CPUID[ 5] == 00000040 00000040 00000003 00001120
CPUID[ 6] == 00000077 00000002 00000009 00000000
CPUID[ 7] == 00000000 00000000 00000000 00000000
CPUID[ 8] == 00000000 00000000 00000000 00000000
CPUID[ 9] == 00000000 00000000 00000000 00000000
CPUID[10] == 07300403 00000000 00000000 00000603
CPUID[11] == 00000000 00000000 00000094 00000000
CPUID[12] == 00000000 00000000 00000000 00000000
CPUID[13] == 00000000 00000000 00000000 00000000
SKU Info: Max Frequency Ratio 22, Max Core Count 6
CPU speed: 2200.00 MHz
Bus speed: 100.00 MHz
Bus to CPU ratio: 1/22
MCG_CAP 00000000:01000c17
Setting CR4 to 00000170
Is it safe to proceed further with InServ boot?