HPE Storage Users Group https://3parug.com/ |
|
HP 3par 7400 problem with initialization https://3parug.com/viewtopic.php?f=18&t=3877 |
Page 2 of 2 |
Author: | MammaGutt [ Fri Mar 03, 2023 5:16 am ] |
Post subject: | Re: HP 3par 7400 problem with initialization |
If system is healthy, press 1. |
Author: | MichalK2 [ Fri Mar 03, 2023 6:06 am ] |
Post subject: | Re: HP 3par 7400 problem with initialization |
Did I do the following? that's all right ? Or is there a mistake? Code: 3PAR Console Menu 1621379-1 3.2.2.709 1. Out Of The Box Procedure 2. Re-enter network configuration 3. Update the CBIOS 4. Enable or disable CLI error injections 5. Perform a Node-to-Node rescue 6. Set up the system to wipe and rerun ootb 7. Cancel a wipe 8. Perform a deinstallation 9. Update the system for recently added hardware (admithw) 10. Check system health (checkhealth) 11. Finish SP-to-Node rescue procedure 12. Exit > 1 It appears your Cluster is in a proper manual startup state to proceed. Removing VMs Welcome to the Out-Of-The-Box Experience 3.2.2.798 ***************************************************************************** ***************************************************************************** * * * CAUTION!! CONTINUING WILL CAUSE COMPLETE AND IRRECOVERABLE DATA LOSS * * * ***************************************************************************** ***************************************************************************** You need to have the StoreServ network config information available. This can be obtained from the Systems Assurance Document. DO YOU WISH TO CONTINUE? yes/no ==> yes Cluster has the following nodes: Node 1 Enter < C > to continue or < Q > to quit ==> C Please identify a location so that time zone rules can be set correctly. Please select a continent or ocean. 1) Africa 2) Americas 3) Antarctica 4) Arctic Ocean 5) Asia 6) Atlantic Ocean 7) Australia 8) Europe 9) Indian Ocean 10) Pacific Ocean 11) none - I want to specify the time zone using the Posix TZ format. #? 8^H^H^H Please enter a number in range. #? 8 Please select a country. 1) Albania 18) Guernsey 35) Poland 2) Andorra 19) Hungary 36) Portugal 3) Austria 20) Ireland 37) Romania 4) Belarus 21) Isle of Man 38) Russia 5) Belgium 22) Italy 39) San Marino 6) Bosnia & Herzegovina 23) Jersey 40) Serbia 7) Britain (UK) 24) Latvia 41) Slovakia 8) Bulgaria 25) Liechtenstein 42) Slovenia 9) Croatia 26) Lithuania 43) Spain 10) Czech Republic 27) Luxembourg 44) Sweden 11) Denmark 28) Macedonia 45) Switzerland 12) Estonia 29) Malta 46) Turkey 13) Finland 30) Moldova 47) Ukraine 14) France 31) Monaco 48) Vatican City 15) Germany 32) Montenegro 49) Ă…land Islands 16) Gibraltar 33) Netherlands 17) Greece 34) Norway #? 41 The following information has been given: Slovakia Therefore TZ='Europe/Bratislava' will be used. Local time is now: Fri Mar 3 11:53:12 CET 2023. Universal Time is now: Fri Mar 3 10:53:12 UTC 2023. Is the above information OK? 1) Yes 2) No #? 1 You can make this change permanent for yourself by appending the line TZ='Europe/Bratislava'; export TZ to the file '.profile' in your home directory; then log out and log in again. Here is that TZ value again, this time on standard output so that you can use the /usr/bin/tzselect command in shell scripts: Updating all nodes to use timezone Europe/Bratislava... Timezone set successfully. Setting TOD on all nodes. Current date according to the system: Fri Mar 3 11:53:24 CET 2023 Enter dates in MMDDhhmmYYYY format. For example, 031822572002 would be March 18, 2002 10:57 PM. Enter the correct date and time, or just press enter to accept the date shown above. ==> 030311572023 Fri Mar 3 11:57:00 CET 2023 Is this the desired date? (y/n) y Enter the StoreServ system name ==> Storage2 Cluster will be initialized with the name < Storage2 > IS THIS THE CORRECT NAME? yes/change ==> yes Cluster is being initialized with the name < Storage2 > ...Please Wait... Please verify your InForm OS versions are correct. Release version 3.2.2.709 (MU6) Patches: P99,P107,P119,P131,P135,P139,P149,P154,P160,P162,P165,P166,P168 Component Name Version CLI Server 3.2.2.809 (P165) CLI Client 3.2.2.809 System Manager 3.2.2.809 (P165) Kernel 3.2.2.709 (MU6) TPD Kernel Code 3.2.2.709 (MU6) TPD Kernel Patch 3.2.2.809 (P165) Enter < C > to continue or < Q > to quit ==> X^H^H Enter < C > to continue or < Q > to quit ==> C Examining the port states... All ports are in acceptable states. Examining state of new disks... Found < 24 > HCBRE0900GBAS10K disks Cluster has < 24 > total disks in < 24 > magazines. < 24 > are degraded. Now would be the time to fix any disk problems. Enter < C > to continue, < R > to retry, or < Q > to quit ==> C Ensuring all ports are properly connected before continuing... Please Wait... Found one or more discrepancies when examining cage connections: Component ---------Description---------- Qty Cabling Missing node for cabling check 1 -Identifier- -- ------------------Description------------------- node0 -- No cabling data for node0. Check status of node0 Please verify whether the output above is as expected. Enter < C > to continue, < R > to retry, or < Q > to quit ==> C Examining drive cage firmware... Please wait a moment... 1 cage requires firmware upgrades. This will require approximately 10-20 minutes. Enter y to proceed with this action, or n to skip it. y 2023-03-03 11:57:55 CET Skipping cage cage0 cpuA already up to date at rev 409b Cage cage0 cpuB is invalid. Skipping upgrade for cage cage0 cpuB. Waiting for cage0 to finish coming back... All disks have current firmware. Issuing admitpd... Please wait a moment... admitpd completed with the following results... Found < 24 > HCBRE0900GBAS10K disks Cluster has < 24 > total disks in < 24 > magazines. < 24 > are degraded. Not all of the disks are in a valid state. Enter < C > to continue or < Q > to quit ==> C At this point, it is recommended that the OOTB stress test be started. This will run heavy I/O on the PDs for 1 hour following 1 hour of chunklet initialization. The stress test will stop in approximately 2 hours and 15 minutes. Chunklet initialization may continue even after the stress test completes. Failures will show up as slow disk events. Do you want to start the test (y/n)? ==> y Starting system stress test... Unable to proceed because the system is not connected to any disks. Admin volume could not be properly created! Exiting Out-Of-The-Box Experience... 3PAR Console Menu 1621379-1 3.2.2.709 1. Out Of The Box Procedure 2. Re-enter network configuration 3. Update the CBIOS 4. Enable or disable CLI error injections 5. Perform a Node-to-Node rescue 6. Set up the system to wipe and rerun ootb 7. Cancel a wipe 8. Perform a deinstallation 9. Update the system for recently added hardware (admithw) 10. Check system health (checkhealth) 11. Finish SP-to-Node rescue procedure 12. Exit > 1 The system is currently running. It needs to be in manual startup state for ootb to run. If you are attempting to handle hardware upgrades, use the admithw CLI command instead. Exiting Out-Of-The-Box Experience... 3PAR Console Menu 1621379-1 3.2.2.709 1. Out Of The Box Procedure 2. Re-enter network configuration 3. Update the CBIOS 4. Enable or disable CLI error injections 5. Perform a Node-to-Node rescue 6. Set up the system to wipe and rerun ootb 7. Cancel a wipe 8. Perform a deinstallation 9. Update the system for recently added hardware (admithw) 10. Check system health (checkhealth) 11. Finish SP-to-Node rescue procedure 12. Exit > |
Author: | MammaGutt [ Fri Mar 03, 2023 10:44 am ] |
Post subject: | Re: HP 3par 7400 problem with initialization |
Well, that output clearly states you do not have a healthy system. You only have node 1. Node 0 is missing. System is not healthy, system will not initialize. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |