HPE Storage Users Group https://3parug.com/ |
|
No chunklets to move? Replaced disk https://3parug.com/viewtopic.php?f=18&t=2807 |
Page 1 of 1 |
Author: | 3parzx [ Fri Feb 23, 2018 4:03 pm ] |
Post subject: | No chunklets to move? Replaced disk |
Hello! We recently replaced a failed disk with HP support and after a servicemag resume which auto started, it says it sucessfully brought the mag online, but said no chunkets to move? Is this normal? The output is below... servicemag status -d 2 20 The magazine was brought online by a successful servicemag resume command. The command completed at Wed Feb 21 11:25:47 2018. The output of the servicemag resume was: servicemag resume 2 20 ... mag 2 20 already onlooped ... firmware is current on pd WWN [5000C500A0D8F8F4] ... firmware is current on pd WWN [5000C50070D323E4] Id [81] ... checking for valid disks... ... checking for valid disks... ... disks in mag : 2 20 ... normal disks: WWN [5000C500A0D8F8F4] Id [ 6] diskpos [0] ... not normal disks: WWN [5000C50070D323E4] Id [81] ... playback chunklets from pd WWN [5000C500A0D8F8F4] Id [ 6] ... All chunklets played back / relocated. ... cleared logging mode for cage 2 mag 20 ... no chunklets to move ... -pdid(s) 81 successfully dismissed. servicemag resume 2 20 -- Succeeded |
Author: | MammaGutt [ Sat Feb 24, 2018 4:57 am ] |
Post subject: | Re: No chunklets to move? Replaced disk |
And two lines above it says that all chunklets are played back. What does showpd -c say? Does the new drives have chunklets? |
Author: | koopa79 [ Tue Feb 27, 2018 5:28 am ] |
Post subject: | Re: No chunklets to move? Replaced disk |
my guess the 3par would have relocated the chunklets previously. probably already hit a threshold where it knew the disk was going to fail and then started moving them then. to be fair that is only a guess |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |