HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: No chunklets to move? Replaced disk
PostPosted: Fri Feb 23, 2018 4:03 pm 

Joined: Tue Feb 20, 2018 3:18 pm
Posts: 3
Hello!



We recently replaced a failed disk with HP support and after a servicemag resume which auto started, it says it sucessfully brought the mag online, but said no chunkets to move? Is this normal? The output is below...





servicemag status -d 2 20
The magazine was brought online by a successful servicemag resume command.
The command completed at Wed Feb 21 11:25:47 2018.
The output of the servicemag resume was:
servicemag resume 2 20
... mag 2 20 already onlooped
... firmware is current on pd WWN [5000C500A0D8F8F4]
... firmware is current on pd WWN [5000C50070D323E4] Id [81]
... checking for valid disks...
... checking for valid disks...
... disks in mag : 2 20
... normal disks: WWN [5000C500A0D8F8F4] Id [ 6] diskpos [0]
... not normal disks: WWN [5000C50070D323E4] Id [81]
... playback chunklets from pd WWN [5000C500A0D8F8F4] Id [ 6]
... All chunklets played back / relocated.
... cleared logging mode for cage 2 mag 20
... no chunklets to move
... -pdid(s) 81 successfully dismissed.
servicemag resume 2 20 -- Succeeded


Top
 Profile  
Reply with quote  
 Post subject: Re: No chunklets to move? Replaced disk
PostPosted: Sat Feb 24, 2018 4:57 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
And two lines above it says that all chunklets are played back.

What does showpd -c say? Does the new drives have chunklets?

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: No chunklets to move? Replaced disk
PostPosted: Tue Feb 27, 2018 5:28 am 

Joined: Mon Apr 14, 2014 9:07 am
Posts: 189
my guess the 3par would have relocated the chunklets previously. probably already hit a threshold where it knew the disk was going to fail and then started moving them then.

to be fair that is only a guess


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 78 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt