HPE Storage Users Group https://3parug.com/ |
|
how to check if a VV if TDVV2 or TDVV3 https://3parug.com/viewtopic.php?f=18&t=2792 |
Page 1 of 1 |
Author: | Kyle [ Mon Feb 05, 2018 1:32 pm ] |
Post subject: | how to check if a VV if TDVV2 or TDVV3 |
I did my upgrade to 3.3.1 and now I need to start migrating everything to the new dedupe format. Is there any way to determine if a VV is TDVV2 or TDVV3? I don't see anything in the GUI and a showvv just says everything is tdvv |
Author: | MammaGutt [ Mon Feb 05, 2018 2:40 pm ] |
Post subject: | Re: how to check if a VV if TDVV2 or TDVV3 |
TDVV version is on the CPG level, not VV level. If I recall correctly you will see this under "DDSType" in "showcpg -d". All VVs within a CPG has the same TDVV version. |
Author: | Kyle [ Thu Feb 08, 2018 1:20 pm ] |
Post subject: | Re: how to check if a VV if TDVV2 or TDVV3 |
MammaGutt wrote: TDVV version is on the CPG level, not VV level. If I recall correctly you will see this under "DDSType" in "showcpg -d". All VVs within a CPG has the same TDVV version. Thanks for the hint. I see a shared version column which has a -, 2 or 3 depending on what's in my CPG which tells me the TDVV version. Also found it in SSMC now that I know where to loook (CPG screen and not volume screen!) |
Author: | rmkenyon [ Mon Jan 21, 2019 7:06 am ] |
Post subject: | Re: how to check if a VV if TDVV2 or TDVV3 |
Just to add to this, from 3PAR OS 3.3.1, the showcpg -d output column header is no longer "DDSType", it is now "Shared Version" which shows the version of all TDVVs in a particular CPG. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |