HPE Storage Users Group
https://3parug.com/

Multiple SSD types in same system
https://3parug.com/viewtopic.php?f=18&t=2791
Page 1 of 1

Author:  InteraX [ Mon Feb 05, 2018 8:33 am ]
Post subject:  Multiple SSD types in same system

We just added some more SSD disks into our system.

All of our original SSD disks are 480GB 150K SSDs. The new SSDs are 480GB 100K SSDs.

What are the performance differences between these SSDs? Will we be able to balance our loads between or across these disks without issue?

Author:  MammaGutt [ Mon Feb 05, 2018 2:42 pm ]
Post subject:  Re: Multiple SSD types in same system

not sure about performance issue, but as long as you don't filter on rpm on your SSD CPG there should be no issues balance the load between the old and new SSDs.

Author:  InteraX [ Fri Feb 09, 2018 6:17 am ]
Post subject:  Re: Multiple SSD types in same system

Thanks. It's a shame SSMC won't let me create the CPG like that. I had to use IMC.

Author:  rajdude [ Mon Jun 28, 2021 11:02 am ]
Post subject:  Re: Multiple SSD types in same system

Well, since this old post still comes up at the top, if I Google this issue.....let me update it with my experience:

A couple of days back I was facing the exact same dilemma.....so I called 3PAR........the guy said it is OK to mix and helped me configure my CPG and run a tunesys,

Now I see that the 100k and 150k SSDs have been balanced. No issues so far...........but it has only been a couple of days.

Author:  TyraNoah [ Mon Aug 02, 2021 11:04 am ]
Post subject:  Re: Multiple SSD types in same system

SSDS really the best for this kind of job. Had not known that they consume less power other than just being less sized and faster!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/