HPE Storage Users Group https://3parug.com/ |
|
3PAR management network unable to access https://3parug.com/viewtopic.php?f=18&t=2769 |
Page 1 of 1 |
Author: | shang83 [ Sat Jan 20, 2018 9:31 am ] |
Post subject: | 3PAR management network unable to access |
I have a 8200 connected with 2 management network connected. When i test the redundancy management network, it fails. How can I bring back the management IP up without halting the storage? |
Author: | MammaGutt [ Sun Jan 21, 2018 3:24 am ] |
Post subject: | Re: 3PAR management network unable to access |
Pull the network cable on the node where management isn't working, that will fail it back to the other node. |
Author: | shang83 [ Thu Jan 25, 2018 12:56 am ] |
Post subject: | Re: 3PAR management network unable to access |
I reboot the node 1 at a time to resolve this issue. |
Author: | RitonLaBevue [ Thu Jan 25, 2018 4:56 am ] |
Post subject: | Re: 3PAR management network unable to access |
or you can issue this command : setnet changenode 0 |
Author: | sanjac [ Thu Jan 25, 2018 7:31 am ] |
Post subject: | Re: 3PAR management network unable to access |
how do you reboot just one node? |
Author: | Georgii [ Thu Jan 25, 2018 8:25 am ] |
Post subject: | Re: 3PAR management network unable to access |
shutdownnode reboot 0 or 1 |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |