HPE Storage Users Group
https://3parug.com/

New VV, unable to select a CPG via the web interface?
https://3parug.com/viewtopic.php?f=18&t=2760
Page 1 of 1

Author:  AaronW [ Tue Jan 09, 2018 1:25 pm ]
Post subject:  New VV, unable to select a CPG via the web interface?

Hello. When I create a new VV I notice that the web interface will not allow me to select certain CPG. My main R5 and R6 CPG are not an option, even if I search. But if I fire up the old stand alone client I can create a VV using that CPG with no problem. What could be causing this?

Author:  AaronW [ Thu Jan 11, 2018 12:24 pm ]
Post subject:  Re: New VV, unable to select a CPG via the web interface?

This is so strange. If I create a VV on the web interface the two main CPG we use, R5_Data, and R6_Data are not an option at all. But if I use the old client they are. This is worrying me.

Author:  Noss [ Thu Jan 11, 2018 12:36 pm ]
Post subject:  Re: New VV, unable to select a CPG via the web interface?

Are you just trying to create a Thin Provisioned volume?

Author:  AaronW [ Thu Jan 11, 2018 2:05 pm ]
Post subject:  Re: New VV, unable to select a CPG via the web interface?

Yeah, creating a TPVV with either of those CPG.

Author:  Noss [ Fri Jan 12, 2018 9:27 am ]
Post subject:  Re: New VV, unable to select a CPG via the web interface?

Have you tried restarting the SSMC services or removing/adding the connection to the 3PAR from SSMC?

Author:  AaronW [ Tue Jan 16, 2018 2:21 pm ]
Post subject:  Re: New VV, unable to select a CPG via the web interface?

No, I'll will give that a shot. Thanks for the tip.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/