| HPE Storage Users Group https://3parug.com/ |
|
| 3PAR: Port WWN not found on FC Fabric https://3parug.com/viewtopic.php?f=18&t=2713 |
Page 1 of 1 |
| Author: | Guktilar [ Thu Nov 09, 2017 7:31 am ] |
| Post subject: | 3PAR: Port WWN not found on FC Fabric |
Hello, I have 3PAR 7400c. Service Processor 5.0.2.0-23974, 3PAR OS 3.3.1.215 (GA)+P01,P02,P04,P06,P13,P16 After executing the command "checkhealth -detail": Code: Host Port:1:1:1 Port WWN not found on FC Fabric attached to Port:0:1:1 Host Port:0:1:2 Port WWN not found on FC Fabric attached to Port:1:1:2 Code: showport ===================================== N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner FailoverState 0:1:1 target ready 2FF70002AC015BCE 20110002AC015BCE host FC c7000 b1 x1 1:1:1 none 0:1:2 target ready 2FF70002AC015BCE 20120002AC015BCE host FC c7000 b2 x2 1:1:2 none 1:1:1 target ready 2FF70002AC015BCE 21110002AC015BCE host FC c7000 b2 x1 0:1:1 none 1:1:2 target ready 2FF70002AC015BCE 21120002AC015BCE host FC c7000 b1 x2 0:1:2 none ------------------------------------------------------------------------------------------------------------- 3PAR connected directly (Direct Attach) to the Virtual Connection: Port 0:1:1 -> c7000 Bay1 Port X1 Port 0:1:2 -> c7000 Bay2 Port X2 Port 1:1:1 -> c7000 Bay2 Port X1 Port 1:1:2 -> c7000 Bay1 Port X2 All servers successfully apply profiles. In Windows all connected drives are visible. What is this error and how fix it? Thanks! |
|
| Author: | Noss [ Thu Nov 09, 2017 8:10 am ] |
| Post subject: | Re: 3PAR: Port WWN not found on FC Fabric |
Assuming Bay 1 is one Fabric and Bay 2 is another Fabric wouldn't Port 1:1:1 go into Bay 1 and Port 1:1:2 go into Bay 2 to match it's partner ports? |
|
| Author: | MammaGutt [ Thu Nov 09, 2017 9:01 am ] |
| Post subject: | Re: 3PAR: Port WWN not found on FC Fabric |
Wild guess, you've only booted one server? Or not created the SAN-fabric in Virtual Connect to contain the X2 ports. I assume you've read this (scenario 6): http://h20628.www2.hpe.com/km-ext/kmcsd ... 940-16.pdf |
|
| Author: | Guktilar [ Thu Nov 09, 2017 12:09 pm ] |
| Post subject: | Re: 3PAR: Port WWN not found on FC Fabric |
MammaGutt wrote: Wild guess, you've only booted one server? Thank you, I'll take a look tomorrow.Or not created the SAN-fabric in Virtual Connect to contain the X2 ports. I assume you've read this (scenario 6): http://h20628.www2.hpe.com/km-ext/kmcsd ... 940-16.pdf Noss wrote: Assuming Bay 1 is one Fabric and Bay 2 is another Fabric wouldn't Port 1:1:1 go into Bay 1 and Port 1:1:2 go into Bay 2 to match it's partner ports? Thank you, Bay1 - Fabric A Bay2 - Fabric B I'll try your method tomorrow. |
|
| Author: | Guktilar [ Fri Nov 10, 2017 12:56 am ] |
| Post subject: | Re: 3PAR: Port WWN not found on FC Fabric |
Noss wrote: Assuming Bay 1 is one Fabric and Bay 2 is another Fabric wouldn't Port 1:1:1 go into Bay 1 and Port 1:1:2 go into Bay 2 to match it's partner ports? You were right!I reconnected the ports and the error went away. Now: Port 0:1:1 -> c7000 Bay1 (Fabric A) Port X1 Port 0:1:2 -> c7000 Bay2 (Fabric B) Port X1 Port 1:1:1 -> c7000 Bay1 (Fabric A) Port X2 Port 1:1:2 -> c7000 Bay2 (Fabric B) Port X2 Thanks for help! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|