HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Force IP change administrator
PostPosted: Wed Oct 18, 2017 11:12 am 

Joined: Wed Oct 18, 2017 9:59 am
Posts: 4
Location: Guadalajara, Jalisco, Mexico
Hello All.


I have a problem to change to the ip of administration, I throw the following message: "only one ip address can be changed at a time" . This ip change process will have to be via cable console?


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Thu Oct 19, 2017 1:36 am 

Joined: Fri Jun 27, 2014 2:01 am
Posts: 390
Hello,


Of course, no.
How do you proceed to change the ip address ?

setnet startaddr <old ip> <new ip> <new netmask>
setnet startgateway <new gateway>
setnet finish -f


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Thu Oct 19, 2017 1:44 pm 

Joined: Wed Oct 18, 2017 9:59 am
Posts: 4
Location: Guadalajara, Jalisco, Mexico
If the process applied was that described in the user guide and the one you mention. However when entering the mentioned syntax the message remains: only one ip address can be changed at a time.

:cry:


most likely, is that you have to perform the process from the console port.


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Fri Oct 20, 2017 3:32 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
It almost seems like the system is already in the process of changing the IP address and you are unable to change more than 1 IP per go. What does shownet output?

I've used the process multiple times via SSH and it works.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Fri Oct 20, 2017 12:54 pm 

Joined: Wed Oct 18, 2017 9:59 am
Posts: 4
Location: Guadalajara, Jalisco, Mexico
Hello Mamma Gut


at the time of execution shownet, shows the same IPs without reflecting the changes entered through the commands:

setnet startaddr <old ip> <new ip> <new mask>

the process I'm doing via putty by ssh.

I think I will have to do it via console cable :(


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Sat Oct 21, 2017 2:55 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
Try "help setnet" too see if you have a command to cancel current ongoing changes, if not do setnet finish and hope it hasn't accepted any changes, then try again.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: Force IP change administrator
PostPosted: Mon Oct 23, 2017 9:37 am 

Joined: Wed Oct 18, 2017 9:59 am
Posts: 4
Location: Guadalajara, Jalisco, Mexico
Hello

use the command: "setnet abort" and with that the problem was solved and the change of IP was made.

Thanks for the support.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt